The perfect all in one solution to secure your DMX installations: 100% electrical isolation b
etween all in/outputs!
2 DMX inputs + 6 DMX outputs, each equipped with 3pin and 5pin XLR connectors.
The merger function combines 2 DMX signals in different ways:
HTP: The highest value of 2 identical channels from 2 DMX signals will have priority.
Backup: When the DMX signal on input A fails, the DMX signal in input B takes over immediately.
Merger: DMX signals from 2 different controllers can be combined and send over 1 cable, you can choose the start address of the second controller.
The splitter function distributes the DMX-signal(s) from the input(s) over 6 identical outputs that are 100% isolated from each other: problems that occur on 1 output will not influence the other outputs!
The timing of the DMX- outputs can be adapted from 23ms to 45ms, increasing compatibility while connecting “slow” DMX devices to “fast” DMX controllers.
Output behavior can be selected when suddenly both DMX-inputs fail:
Null: no DMX signal on the outputs
Hold: keep the last DMX values on the outputs.
Clear: set the DMX values on all outputs to zero.
Easy setup via 4digit LED display