Luminex DMX512-A 2.10 Hub

Connectivity
DMX Input:    4 x Neutrik 5 pin XLR (male)
two on the front, two at the rear
DMX Output:    10 x Neutrik 5 pin XLR (female)
Power:    1 x IEC inlet with fuse holder

DMX Features
Supported Protocols:    DMX512 (1986 & 1990), DMX512-A, RDM ANSI E1.20,
High End TalkBack... Protocol independent
DMX Port Direction:    Input/output (bi-directional)
DMX Zone Selection:    Selection of the related DMX zone per output
DMX Port Isolation:    Optic and galvanic isolation per port
DMX Port Termination/Biasing:    Yes
Propagation Delay:    500 ns
Turnround Time (direction change):    90 µs
Port Load:    max. 32 devices per port

Additional Features
Optical Isolation:    up to 1000 V
Galvanic Isolation:    up to 530 V
Short Circuit Protection:    yes
Embedded Battery:    Protect your DMX network up to 20min at full load

Status Report
Power and Backup Battery:    Power and battery status indicated with
tricolour LED
DMX Port:    Data activity (blue LED)

Option
Connector Type:    Neutrik XLR 3 or 5 Pins, Ethercon
mixed configuration available

Power
Power Input:    90-260 VAC
47-63 Hz
Power Consumption:    20 W
Fuse:    1A 125-250V Slow Blow

Environmental
Operating Temperature:    0 to +60 °C
Storage Temperature:    0 to +60 °C
Humidity:    5-95% non-condensing

Physical
Enclosure:    Bended metal
Dimension (W x D x H):    482 x 183 x 44 mm
Weight:    2,2 Kg
Packaging (W x D x H):    520 x 235 x 50 mm