XTA DP200

Inputs Two electronically balanced.

• Impedance > 10k ohms.
• CMRR >65dB 50Hz - 10kHz.

Outputs Four electronically balanced.

• Source Imp < 60ohms.
• Min. Load 600ohm.
• Max. Level +20dBm into 600 ohm load.

Frequency Resp. ±0.5dB 20Hz - 20kHz.
Dynamic Range >103dB 20Hz -20kHz. unwtd.
Distortion < 0.02% @ 1kHz, +18dBm.
Maximum Delay 682 mS. (increment 21 μS)
Output gain Adjustable +15dB to -40dB in 0.1dB steps and mute.
Input gain Adjustable 0dB to -40dB in 0.1dB steps. (crossovermodes only)
Parametric Equalisation

• Filters 8 Sections per output ( 16 in Dual mode).
• Filter gain +15dB to -30dB in 0.1dB steps.
• Centre frequency 20Hz - 20kHz, 1/24 octave steps. (240 positions)
• Filter Q 0.4 to 128

(Sections 1 & 2 switchable to Shelving response)

• Low frequency 20Hz - 1kHz
• High frequency 1kHz - 20kHz
• Shelf gains ±15dB in 0.1dB steps.

High and Lowpass Filters

• Filters 1 of each per output.
• Frequency (HPF) 10Hz - 16kHz, 1/24 octave steps.
• Frequency (LPF) 60Hz - 22kHz, 1/24 octave steps.
• Response Bessel / Butterworth 12/18/24dB per octave and
• Linkwitz-Riley 24dB per octave.

Limiters

• Threshold +20dBu to -27dBu (dependant on operating level).
• Attack time 1 to 99 milliseconds.
• Release time 4, 8 or 16 times the attack time.(Slow, Medium, Fast)

Operating level Headroom selectable +3dB, +8dB, +15dB & +20dB.
Display 2 x 20 character backlit LCD.
Headroom meter 2 x 7 point, -30dB to clip.
Connectors

• Inputs 3 pin female XLR.
• Outputs 3 pin male XLR.
• MIDI In / Out / Thru 5 pin DIN.
• Power 3 pin IEC.

Optional Interfaces RS232 (9 way DEE), RS422 (9 way DEE) and RS485 (8way RJ45 x 2). These options also provide closedcontact memory recall via 8 pin DIN socket.
Power 110 / 220 V ±15% @ 50/60Hz.
Consumption < 20 watts.
Weight 3.5kg. Net (4.8kg. Shipping)
Size  44 * 482 * 300mm excluding connectors.