- Cooling : Two fans front-to-rear airflow temperature controlled speed
- Depth : 396 mm
- Height : 88 mm
- Impedance : 20000 ohm
- Width : 483 mm
- AC Voltage : 265 Volts
- Common Mode Rejection (CMR) : >54 dB 20 Hz to 20 kHz
- Power Handling : 10000 Watt
- Product Weight : 12 kg
- Color : Black
- Minimum Frequency Response (Bandwidth) : 20 Hz
- Maximum Frequency Response (Bandwidth) : 20 kHz
- Signal to Noise Ratio : 112 dB
- Number of Channels : 4
- Number of Inputs : 2
- Number of Outputs : 2
- Total Harmonic Distortion + Noise (THD+N) : 0.10 %
- Number of Watts Per Channel : 2500 Watt
- Rack Units (Height) : 2
- Current Draw : 5 Amps
- THD at 1 kHz and 1 dB below clipping : <0.05%
- Channel separation (Crosstalk) at 1 kHz : >70 dB
- Output impedance @ 100 Hz : 32 mOhm
- Voltage Peak Limiter (VPL) max. peak output :
- VPL selectable per ch. : 150 121 101 83 70 56 47 38 V
- VPL selectable when bridged 1) : 300 242 202 166 140 112 94 76 VV
- Voltage Peak Limiter mode (per ch.) : Hard / Soft
- Gain and Level :
- Amplifier gain selectable (all channels) 1) 23 26 29 32 35 38 41 44 dB :
- Default gain : 35 dB
- Level adjustment (per ch.) : Front-panel potentiometer 31 position detented from -inf to 0 dB
- Connectors and Switches :
- Input connectors (per ch.) : 3-pin XLR electronically balanced
- Output connectors (per ch.) : Binding Posts 2-pole
- Output bridge mode per two ch.â??s : A+B - Ch. A is signal input source
- Intelligent fans (on/off) : Yes depending on presence of output signal
- Power on/off and Remote enable on/off : Individual switches on front-panel
- NomadLink network On board : 2 x RJ45 etherCON® connectors IN and OUT
- Frequency response (1 W into 8 ohms) +0/-3 dB : 6.8 Hz - 34 kHz
Flagship four-channel model of the FP+ Series
Locatie |
Almelo |
Verhuurder |
Valk Sound & Light productions |
Afstand |
|
Aantal beschikbaar |
7 stuk(s) |
Prijs p/d |
€ 35,00 |
|
In winkelwagen
|