Channel separation: |
> 70 dB @ 1 kHz, |
|
150 W into 8 £2 |
|
> 50 dB @ 20 kHz, |
|
150 W into 8 £2 |
Total Harmonic Distortion (THD): |
< 0.2 % @ 20 Hz - 20 kHz more than 2 ohm load at |
|
all powers, 10 % below clip level |
|
< 0.02 %@ 1 kHz, |
|
200 [100] W into 8 £2 |
|
< 0.05 % @ 20 kHz, |
|
200 [100] W into 8 £2 |
|
< 0.01 % @ 1 kHz, 1 W into 8 £2 |
Intermodulation distortion (IMD): |
< 0.05 % @ 200 Hz - 20 kHz, fi = 70 Hz, 4:1, |
|
200 [100] W into 8 £2. |
Signal to noise ratio: |
> 110 dB |
Output Stage |
|
Slew rate: |
> 40 V/us |
Damping factor (with DDC): |
2,500 @ 1 kHz (10 V across 8 £2) |
Output power (RMS): |
2 x 320 [160] W into 8 ohm |
|
2 x 520 [230] W into 4 ohm |
|
2 x 610 [300] W into 2 ohm |
Peak output power: |
2 x 440 [220] W into 8 ohm |
|
2 x 800 [400] W into 4 ohm |
|
2 x 1.100 [550] W into 2 ohm |
Output power bridge mode (RMS): |
1 x 640 [320] W into 16 ohm |
|
1 x 900 [460] W into 8 ohm |
|
1 x 1,200 [600] W into 4 ohm |
Peak output power bridge mode: |
1 x 880 [440] W into 16 ohm |
|
1 x 1,600 [800] W into 8 ohm |
|
1 x 2,200 [1,100] W into 4 ohm |
General |
|
Mains supply voltage: |
stated at rear of amplifier |
Continuous power consumption: |
100 VA (standby) |
|
2,200(1,100] VA |
|
(at maximum continuous output) |
Weight: |
18.2 kg |
Housing: |
19 in rack mount |
|
2 HU, 18 in deep (without connectors) |
Dimensions: |
88 x 482 x 462 mm (h x w x d) |