- Compatible systems per frequency band: 8
- Auto Setup Features: Scan/Sync
- Audio Reference Companding: Yes
- Included Antennas: Attached 1/4-wave
- Antenna Options: No
- PC Control: No
- Receiver Network Ability: No
- Rack Hardware: Optional (URT)
- Case: System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED & channel display
- Battery, Endurance: 2AA, >8 h
- Environment: Small to medium stages, fitness centres, churches, small theatres, schools/lecture halls, karaoke
PGX4 Receiver
Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight
327 g (11.5 oz.)
Housing
ABS
Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): –19 dBV
1/4 inch connector (into 3000 Ω load): –5 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
–105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply
PGX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions including SM58 cartridge
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 “AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)