Hét online platform voor AV verhuurbedrijven
Martin Jem 24/7
HEAT EXCHANGER
- 900W
- Wide bore steel vaporizing coil
- Non resettable over-temperature protection
- Electronic Temperature control using thermocouple
- Electronic low fluid detection
- 2.5L fluid container
- Maximum fluid consumption 410mL/hour (Haze fluid, HOT = Lo)
- DMX512 decoder:
- Required Channels = 2
- Output is proportional for all levels above 8%
- Channels supported = 1 to 509
- Valid start codes = 0 (dimmer data only)
- Full framing error detection implemented
- Digital control via Digital Multifunction Controller.
- Digital Machine to Machine link
- LED display with 4 button keypad
- Output level control from 0 to 20
- Fan speed control from 0 to 20
- Timer range:
- Delay time (toF) 0 seconds - 90 seconds
- Run time (ton) 0 seconds - 90 seconds
- Airflow inclination can be set in the range 0 to 60 degrees.
- Input voltage 200 - 250Vac
- Input power (max) 975W © 230V
- Main fuse 6.3AT
- Frequency 50/60Hz
Omschrijving
The rugged ZR 24/7 is a high precision, continuously operating DMX haze generator capable of delivering an optically translucent canvas of light-enhancing haze for long periods. The first in a new range of professional hazers from Jem, the ZR 24/7 uses the latest in reliable digital PCB technology.
Output and density level control
- Continuous output 2000 m³/min
haze output
- Integrated high velocity fan
- 900 Watt heat exchanger
- Less than 3 min heat-up time
- 2.5 liter fluid capacity
- Different fluid viscosity options for
different applications
- Sealed fluid bottle-cap
- Low fluid sensor
- Onboard DMX Controller
- 3 and 5 pin Pre-programmed
- Stand-alone macros
- On-board control panel
- Optional multifunctional remote
control
Specificaties
HEAT EXCHANGER
The rugged ZR 24/7 is a high precision, continuously operating DMX haze generator capable of delivering an optically translucent canvas of light-enhancing haze for long periods. The first in a new range of professional hazers from Jem, the ZR 24/7 uses the latest in reliable digital PCB technology.
Output and density level control
- Continuous output 2000 m³/min
haze output
- Integrated high velocity fan
- 900 Watt heat exchanger
- Less than 3 min heat-up time
- 2.5 liter fluid capacity
- Different fluid viscosity options for
different applications
- Sealed fluid bottle-cap
- Low fluid sensor
- Onboard DMX Controller
- 3 and 5 pin Pre-programmed
- Stand-alone macros
- On-board control panel
- Optional multifunctional remote
control
Specificaties
HEAT EXCHANGER
- 900W
- Wide bore steel vaporizing coil
- Non resettable over-temperature protection
- Electronic Temperature control using thermocouple
- Electronic low fluid detection
- 2.5L fluid container
- Maximum fluid consumption 410mL/hour (Haze fluid, HOT = Lo)
- DMX512 decoder:
- Required Channels = 2
- Output is proportional for all levels above 8%
- Channels supported = 1 to 509
- Valid start codes = 0 (dimmer data only)
- Full framing error detection implemented
- Digital control via Digital Multifunction Controller.
- Digital Machine to Machine link
- LED display with 4 button keypad
- Output level control from 0 to 20
- Fan speed control from 0 to 20
- Timer range:
- Delay time (toF) 0 seconds - 90 seconds
- Run time (ton) 0 seconds - 90 seconds
- Airflow inclination can be set in the range 0 to 60 degrees.
- Input voltage 200 - 250Vac
- Input power (max) 975W © 230V
- Main fuse 6.3AT
- Frequency 50/60Hz
| Locatie | Harderwijk |
| Verhuurder | Music Support |
| Afstand | |
| Aantal beschikbaar | 1 stuk(s) |
| Prijs p/d | € 35,00 |
| In winkelwagen |
