L-Acoustics P1

Features

• EQ station with delay and dynamics processing
• Multi-mic acoustic measurement platform
• Bridging of AVB, AES/EBU and analog audio
• 4-bus matrix routing and mixing
• Fully integrated in LA Network Manager 2
• Offline delay finder and EQ
• Time-aligned redundant signal distribution
• 20 in x 18 out architecture

Specifications

• Mains rating: 100 V - 240 V ( ±10%), 50-60 Hz 
• Operating temperature: 0 °C / 32 °F to 50 °C / 122 °F

• Standards: AVB, IEEE 1722, IEEE 1722.1
• Number of input/output streams: 1/1
• Supported stream formats: IEC 61883-6 AM824, AAF PCM32 
• Supported sampling frequencies: 48 or 96 kHz
• Supported channel counts (input stream or output stream): 1 to 8
• Channel selection: Up to 8 channels

• Number of line inputs: 4
• Input impedance: 22 kΩ balanced
• Max. input level: +22 dBu
• Frequency response: ±0.1 dB (10 Hz - 20 kHz)
• A/D conversion: Operating at 32-bit/96 kHz
• Input dynamic range: 125 dB (-60 dBFs, A-weighted 20 kHz bandwidth)
• Distortion THD+N ratio: 0.0005%, 1 kHz, 12 dBu (10 dB below max), 20 kHz bandwidth
• Channel separation:  > 120 dB (at 1 kHz)

• Line output impedance: 100 Ω balanced
• Max. output level: +22 dBu
• Frequency response: ±0.1 dB (10 Hz - 20 kHz, load > 600 Ω)
• Output dynamic range: 125 dB (-60 dBFs, A-weighted, 20 kHz bandwidth)
• Distortion THD+N ratio: 0.0005%, 1 kHz, 0 dBFS, 20 kHz bandwidth
• Channel separation: >120 dB (at 20Hz - 20kHz)

• Height: 1U
• Weight: 3,7kg / 8,2lbs
• Protection ratin: IP3x