Nexo DTD-T

Features

• Speaker controller for PS and LS series, providing digital processing from the NXAMP technology (Crossover, EQ, time alignment and speaker protection)
• High-end Balanced stereo analogue inputs, AES input, USB input and optionally Dante™
• High-end balanced analogue outputs for PS (Stereo) and LS (mono sum)
• Automatic Amplifier Sensing with no setting required from user
• Simple control from the front panel (Sub Gain, Main Gain, Crossover mode) or advanced control using USB port

Specifications

• Sampling frequency and resolution 48/96 KHz, 64 bits internal processing precision
• Signal delay Less than 1 ms (analog in to out) on flat setup, compatible with NXAMP latency
• Frequency response 20 Hz to 20 KHz, +/-0.5 dB (mains out), 20 Hz to 2 KHz +/-0.5 dB (sub out)
• Total harmonic distortion Less than 0.001% (mains out), less than 0.02% (sub out)
• Dynamic range 112 dB (unweighted, mains out), 107 dB (unweighted, sub out)
• Crosstalk / Channel separation -100 dB (1KHz)
• Indicators Input signal/peak (green/red), amp in signal (green), speaker protect (yellow)
• Display White backlight graphical OLED display 96 x 16 pixels
• Switch and rotary knobs 3 position switch + 2 x rotary knobs

• Number of channels 2 electronically balanced analog inputs
• Connectors 2 x XLR-F with link on XLR-M
• Sampling frequency and resolution 96 KHz / 24 bits
• Max. input level / Input impedance +22 dBU / 20 KOhms

• Number of channels 3 electronically balanced analog outputs
• Connectors 3 x XLR-M
• Sampling frequency and resolution 48/96 KHz, 24 bits
• Max. output level / Output impedance + 22 dBU / 200 Ohms

• Number of channels 4 floating electronically balanced high voltage analog inputs
• Connectors 2 x 4 pole SP connectors
• Sampling frequency and resolution 48/96 KHz, 24 bits
• Max. input level / Input impedance +50 dBU (8000 Watts / 8 Ohms) / 364 KOhms

• Number of channels 1 AES/EBU stereo digital input
• Connectors 1 x XLR-F
• Sampling frequency and resolution 44.1 to 96 KHz / 16, 20 or 24 bits

• Number of channels 2 x Dantetm channels
• Connector 1 x ruggedized RJ45
• Sampling frequency and resolution 48-96 KHz / 24 bits

• Type 2 channels of USB audio
• Connector Female mini USB connector type B
• Sampling frequency and resolution 48 KHz / 16 bits
• Remote Control (DTD-T) Mini USB
• Remote Control (DTD-T-N) Mini USB + RJ45
• Dimensions (W x H x D) 480 (W) x 44 (H) x 65 (D) mm, 1U
• Weight 1.3 Kg
• Power supply voltage 90 V - 240 V 50/60 Hz
• Power consumption 20 W max
• Heat dissipation (per hour) 20 Kcal max
• Operating temperature range 0°C - 40 °C
• Storage temperature range -20 °C - 60 °C