Turbosound NuQ102-AN

Features

• 2 way full range powered loudspeaker for portable PA and installation applications
• 600 Watt power featuring KLARK TEKNIK Class-D technology
• KLARK TEKNIK Digital Signal Processing for total system control
• ULTRANET digital audio networking connects to mixers and other sources
• 10" low frequency driver with low mass voice coil for improved transient response
• Aluminium dome 1" neodymium motor compression driver
• Rotatable converging elliptical waveguide provides 100° H x 60° V dispersion
• Fully featured user interface with LCD display for ease of navigation
• PC remote control software downloadable at turbosound.com
• 12 mm (1/2") birch plywood enclosure with hard wearing semi matt black paint finish
• Rugged powder coated perforated steel mesh grille
• Integral 35 mm pole mount and handles
• Multiple internal rigging points allow bracket mount and suspension in any orientation

Specifications

• Frequency Response 55 Hz – 18 kHz ±3 dB
• 50 Hz – 20 kHz -10 dB
• Nominal Dispersion 100° H x 60° V @ -6 dB points, rotatable
• Maximum SPL 122 dB peak
• Crossover Type Active
• Transducers 1 x 10" (261.5 mm) LF driver
• 1 x 1" (25.4 mm) HF compression driver
• Limiter Independent HF, LF, peak and rms

• Maximum Output Power* 600 W
• Type Class-D
• Protection Short circuit, thermal

• Input/link 1 x Combo Jack/XLR 1 x XLR
  • Sensitivity +4dBu or +14 dBu software switchable
  • Input impedance 40 kO balanced
  • Maximum input level +22 dBu
     
• Ultranet input/link 2 x RJ45
• Mains Supply Neutrik powerCON 20A

• DSP
  • Rotary push-encoder and level control
  • Buttons for Process, Setup, Exit, Enter

• Factory EQ Presets Positioning, Sound mode, FBQ
• Display LCD 128 x 32, blue, backlit
• Delay 0 - 300 ms
• Equalisation High and low shelving EQ
• 2 x parametric EQ
• Limiter Zero attack input limiter
• Presets 20 total presets, 19 user-definable
• Crossover High Pass L-R 24 dB/oct
• Protection Lock-out function for all settings

• Digital processing
  • A/D conversion 24-bit, 44.1/48kHz sample rate
  • Converter type 24-bit, delta-sigma
     
• System
  • Signal 16 channels
  • Latency < 0.9 ms
  • Frequency response 20 Hz to 20 kHz (+0 / -3 dB)
  • Dynamic range typical 92 dB
     
• Cabling
• Cables Shielded CAT5
• Cable length max. 246 ft / 75 m recommended

• Power consumption 80 W @ 1/8 max power
• Voltage (fuses)
  • USA / Canada 120 V~, 60 Hz (T 6.3 A H 250 V)
  • UK / Australia / Europe 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
  • Korea / China 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
  • Japan 100 V~, 50/60 Hz (T 6.3 A H 250 V)

• Dimensions HWD 525 x 318 x 281 mm (20.7 x 12.5 x 11.1")
• Net weight 13.7kg (30.2 lbs)
• Construction 12 mm (½") birch plywood
• Finish Semi matt white paint
• Grille Powder coated perforated steel
• Flying hardware M10 x 8 points; M8 x 1 point