Allen & Heath DX168

Features

• 16 Mic Preamps on XLR with Phantom Power status LEDs
• 8 XLR Line Outs
• Compatible with dLive S Class and dLive C Class hardware
• Up to 6 DX168 units can be added to a dLive system for 96 inputs / 48 outputs
• Cascade mode allows daisy-chaining of 2 DX168 Expanders for additional I/O (requires firmware 1.60 or higher)
• Redundant DX connection to dLive S Class hardware
• Optional 19-inch rack mount kit available
• Plug and Play – no IP addressing required
• Compatible with CAT5e (or higher) cables of up to 100m
• Rubber bumpers
• Carry handle

Specifications

• XLR Mic/Line Inputs: Balanced, +48V Phantom Power
• Mic/Line Preamp: Fully recallable
• Input Sensitivity: -60 to +15dBu
• Analogue Gain: +5 to +60dB, 1dB steps
• Pad: -20dB Active PAD
• Maximum Input Level: +30dBu (PAD in)
• Input Impedance >4kΩ (Pad out), >10kΩ (Pad in)
   
• Mic/Line Channel noise: 22-22 kHz, Direct Out @ unbalanced out
• Mic EIN: -127dB with 150Ω source
• Unity gain (Pad in): -90dBu
• Low gain (5dB, Pad out): -96 dBu
• Mid gain (30dB, Pad out): -90dBu
   
• Mic/Line Channel THD+N: 22-22 kHz, Direct Out @ unbalanced out
• Unity gain (Pad in): 0.003% -88dBu @ 1kHz, 0dBu output
• Low gain (5dB, Pad out): 0.002% -93dBu @ 1kHz, 0dBu output
• Mid gain (30dB, Pad out): 0.003% -88dBu @ 1kHz, 0dBu output

• XLR Outputs: Balanced, Relay protected
• Output Impedance: <75Ω
• Nominal Output: +4dBu = 0dB meter reading
• Maximum Output Level: +22dBu
• Residual Output Noise: -92dBu (muted, 20-20kHz)

• Operating Temperature: 0 deg C to 35 deg C (32 deg F to 95 deg F)

• Mains Power: 100- 240V, 50/60 Hz, 20W max

• Dimensions
  • Width: 416,55mm
  • Height: 182,10mm
  • Depth: 189,00mm