IT Geluid Communicatie Kabels Licht Sets Rigging Special FX Video Conference Diversen Decor & Stage

Home / Video / Randapparatuur / Scalers & Switchers / Extron DVS 605
In winkelwagen

Extron DVS 605

DVS 605 Series
 
Video input
   Number/signal type  2 RGBHV, RGBS, RGsB, RGBcvS, component video (YUVi or YUVp/HDTV), S-video, composite video
3 HDMI digital video (HDCP compliant)
   Connectors  2 female 15-pin HD: RGB, component video, S-video, composite video
3 female HDMI type A: HDMI
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: 0.0 V to 1.0 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 100 kHz
   Vertical frequency  24 Hz to 120 Hz
   Resolution range  640x480 to 1920x1200*, NTSC, PAL, SECAM, 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 2k sampled pixel for pixel
*reduced blanking
   Return loss  >30 dB @ 5 MHz
   DC offset (max. allowable)  0.5 V
 
Video processing
   Decoder  12 bit digital (3D-adaptive comb filter)
   Analog sampling  12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB)
   Digital pixel data bit depth  8, 10, or 12 bits per channel; 3 channels for HDMI
   Colors  1 billion (10 bit processing)
 
Video output
   Number/signal type   
      DVS 605 1 scaled RGBHV, RGBS, RGsB, or component video (YUVp/HDTV)
1 HDMI digital video (HDCP compliant)
      
   Connectors   
      DVS 605 1 female 15-pin HD: RGB or component video
1 female HDMI: HDMI
      
   Minimum/maximum levels  0.0 V to 1.0 Vp-p for Y of component video and for G of RGsB
0.0 V to 0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Impedance  75 ohms
   Return loss  >21 dB @ 5 MHz
   DC offset  ±300 mV max.
   Scaled resolution  640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9,1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x768 6,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9,1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8
HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz
 
Sync
   Input type  RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video
   Output type  RGBHV, RGBS, RGsB, and bi-level or tri-level component video
   Standards  Input: NTSC 3.58, NTSC 4.43, PAL, SECAM
Output: SMPTE 242M, SMPTE 424M, SMPTE 292M, SMPTE 293M, SMPTE 295M
   Input level  2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
   Output level  TTL: 5.0 Vp-p, unterminated
   Input impedance  Horizontal: 75 ohms
Vertical: 510 ohms
   Output impedance  75 ohms
   Max. input voltage  5.0 Vp-p
   Polarity  Positive or negative (selectable)
 
Audio — DVS 605 A, DVS 605 AD
   Gain  Unbalanced output: -6 dB; balanced output: 0 dB
   Frequency response  Lineout: 20 Hz to 20 kHz, ±0.5 dB
   THD + Noise  Preamp: <0.110% @ 1 kHz, 20 kHz bandwidth, at maximum output level
Lineout: <0.025% @ 1 kHz, 20 kHz bandwidth, at maximum output level
   S/N at maximum power output (unweighted)  Preamp: 90 dB at rated maximum output
Lineout: 90 dB at rated maximum output
   Crosstalk  Preamp: ≤-80 dB @ 1 kHz, fully loaded
Lineout: ≤-80 dB @ 1 kHz, fully loaded
   Stereo channel separation  >84 dB @ 1 kHz
 
Audio input — DVS 605 A, DVS 605 AD
   Number/signal type  5 stereo, balanced/unbalanced
3 stereo, de-embedded from HDMI (LPCM only)
   Connectors  (5) 3.5 mm captive screw connector, 5 pole
3 female HDMI type A
   Impedance  >10k ohms unbalanced, DC coupled
   Nominal level  +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
   Maximum level  +21 dBu, (unbalanced)
   Input gain adjustment  -53 dB to +24 dB, adjustable per input
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
 
Audio output — DVS 605 A, DVS 605 AD
   Number/signal type  Stereo/mono, balanced/unbalanced
      Fixed output  1 analog
1 S/PDIF digital audio (LPCM-2Ch, Dolby Digital, or DTS only)
1 HDMI embedded
1 optional 3G-SDI or HD-SDI embedded
      Variable output  1 analog
   Connectors  (2) 3.5 mm captive screw connectors, 5 pole
1 female RCA (S/PDIF)
1 female HDMI type A (shared with HDMI video)
1 optional female BNC (shared with 3G-SDI or HD-SDI video)
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.25 dB channel to channel
   Maximum level (Hi-Z)  >+21 dBu, balanced; >+11 dBu, unbalanced
   Output volume range  0 dB to -100 dB in 1.0 dB increments
 
Control/remote — scaler
    NOTE     The front panel USB port and rear panel RS-232 port are independent of each other and can be used at the same time.
   Serial control port  1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 5 pole (uses 3 poles)
   Baud rate and protocol  9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configurations  1 = Tx, 2 = Rx, 3 = GND, 4 = GND, 5 = modulated IR input
   USB control ports  1 front panel female mini USB B
   USB standards  USB 2.0, high speed
   Ethernet control port  1 female RJ-45 connector
   Ethernet data rate  10/100Base-T, half/full duplex with autodetect
   Ethernet protocol  ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, Telnet
   Ethernet default settings  Link speed and duplex level = autodetected
DHCP = OFF, IP address = 192.168.254.254
   Web server  Up to 200 simultaneous sessions
40 MB nonvolatile user memory
   Contact closure  1 rear panel 3.5 mm captive screw connector, 5 pole
   Contact closure pin configurations  Pins 1, 2, 3, 4, 5 = inputs 1, 2, 3, 4, 5
   IR remote control  Rear panel captive screw connector (shared with RS-232, uses 2 poles): 
38 kHz, hardwired, modulated
TTL level (0 to 5 V) infrared up to 1 MHz
   Program control  Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Telnet
 
General
   Power supply  Internal
Input: 100-240 VAC, 50-60 Hz
   Power consumption   
      Full load  28.0 watts
      Quiescent  20.1 watts
      Standby  14.6 watts
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Fan, air flows from right to left (as viewed from front panel)
   Thermal dissipation   
      Full load  95.1 BTU/hr
      Quiescent  68.1 BTU/hr
      Standby  49.3 BTU/hr
   Mounting   
      Rack mount  Yes, with included brackets
   Enclosure type  Metal
   Enclosure dimensions  1.75" H x 17.5" W x 10.5" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 26.7 cm D)
(Depth excludes connectors and knobs.  Width excludes rack ears.)
   Product weight   
      DVS 605  2.2 kg
      DVS 605 D  2.3 kg
      DVS 605 A  2.4 kg
      DVS 605 AD  2.5 kg
   Shipping weight  5 kg
   DIM weight  6 kg
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
FX tunnel met seamless switcher
Locatie Bleiswijk
Verhuurder MWee Beeld| Licht | Geluid
Afstand
Aantal beschikbaar 1 stuk(s)
Prijs p/d € 145,00
  In winkelwagen

Rent Around

E: info@rentaround.nl


        

Informatie

Assortiment