Martin Rush Strobe 1

Physical
Length: 500 mm
Width: 101 mm
Height: 500 mm
Weight: 9.5 kg

Dynamic Effects
Strobe effect: Electronic, with regular and random pulse, burst and strobe effects Pre-programmed effects: Effect, letter and number display macros
Electronic dimming: 0 - 100% continuous, individually dimmable pixels
Effects orientation: Standard or inverted 180°

Control and Programming
Control options: DMX, stand-alone
DMX channels: 4/25/29
Stand-alone trigger options: Music trig, auto trig
Stand-alone sequences: 8 pre-programmed shows or random show Stand-alone memory: 20 scenes
Setting and addressing: Control panel with LED display
DMX compliance: USITT DMX512/1990

Optics
Light source: 25 x 5 W Cree cool white LEDs
Color temperature: 6000 - 6500 K
Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer ?s test conditions:

Construction
Color: Black
Housing: Steel Protection rating: IP20

Installation
Location: Indoor use only, must be fastened to surface or structure
Mounting points: Integral hanging brackets (removable), side-by side mounting locks Orientation: Any

Connections
AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR

Electrical
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 148 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.:

Typical Power and Current
110 V, 60 Hz: 2.0 A, 148 W
230 V, 50 Hz: 1.2 A, 146 W