Dolby Lake

Audio Performance

Conversion Resolution 24-bit
Internal Sample Rate 96 kHz
Internal Data Path 32-bit floating point
System Propagation Delay <2 ms from any input to any output (analog or digital)
Maximum Available Delay 2 s from any input to any output

Sample-Rate Converters

Operating Sample Rates 44.1, 48, 88.1, 96 kHz
Resolution 24-bit
THD + Noise 0.00003% typical, 20 Hz to 20 kHz, unweighted
Dynamic Range 140 dB typical, 20 Hz to 20 kHz, unweighted

Back-Panel Interface

Analog I/O Connectors XLR
AES/EBU I/O Connectors 25-pin D-connector, with selectable termination on pairs 1 and 2
S/PDIF I/O Connectors ToslinkTM optical
Word Clock Input BNC with selectable termination

Ethernet

Auto 10/100, Auto Uplink: (2) RJ-45, (1) EtherCon® Power
3-pin IEC, 2 fuses T 1.5A L, 5 × 20 mm

Digital-to-Analog Outputs

Frequency Response +0/–0.1 dB, 3 Hz to 20 kHz
THD + Noise
0.0004% typical at 1 kHz
0.00056% typical, 20 Hz to 20 kHz, unweighted Dynamic Range
113 dB typical, 20 Hz to 20 kHz, unweighted Output Impedance
50Ω
Maximum Output Level +21 dBu
Crosstalk –100 dB, 2 Hz to 40 kHz

Analog?to?Digital Inputs
Frequency Response +0/–0.2 dB, 2 Hz to 20 kHz
THD + Noise 0.00022% typical at 1 kHz, 0.00033% typical, 20 Hz to 20 kHz, unweighted at +21 dBu headroom setting
Dynamic Range 116 dB typical, 20 Hz to 20 kHz, unweighted at +21 dBu headroom setting
Input Impedance 20 kΩ balanced, 10 kΩ unbalanced
Maximum Input Level +26 dBu
Input Sensitivity Settings for Digital Full-Scale  +10, +16, +21, +26 dBu
Common Mode Rejection 65 dB, 20 Hz to 20 kHz, 75 dB typical at 1 kHz, 70 dB typical at 20 kHz
Crosstalk –100 dB, 2 Hz to 40 kHz

Combined A/D and D/A

THD + Noise 0.0005% typical at 1 kHz, 0.00063% typical, 20 Hz to 20 kHz, unweighted
Dynamic Range 113 dB typical, 20 Hz to 20 kHz, unweighted

AES/EBU I/O and S/PDIF I/O

Supported Resolutions Up to 24 bits
Supported Sample Rates 44.1, 48, 88.1, 96 kHz

Dante

Supported Resolution 24 bits
Supported Sample Rate 96 kHz
Number of I/O channels 8 input and 16 output channels
Power Requirements 100–240 VAC ±10%, 120 W maximum
Dimensions and Weight 2-RU rackmount: 8.74 × 48.26 × 35 cm (3.44 × 19 × 13.78 inches); net: 9 kg (20 lb)