IT Geluid Communicatie Kabels Licht Sets Rigging Special FX Video Conference Diversen Decor & Stage

Extron DA6 RGBHV

Video
   Gain  Unity (0 dB) or 1.1 dB (110%), switch-selectable
When input = 0.7 V, output = 0.7 V or 0.8 V, respectively.
   Peaking
      DA6 YUV A  0 dB
      All other models  0 dB or +6 dB at 100 MHz, switch-selectable
   Bandwidth  350 MHz (-3 dB), fully loaded
   Differential phase error  <1.0° at 5 MHz
   Differential gain error  <1.0% at 5 MHz
 
Video input
   Number/signal type  1 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video
   Connectors  5 female BNC
   Nominal level (at unity gain)  1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB, for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 180 kHz
   Vertical frequency  15 Hz to 170 Hz
   Return loss  <-38 dB @ 5 MHz
   DC offset (max. allowable)  5.0 V (in AC coupling mode)
   Input coupling  AC/DC, switch-selectable
 
Video output
   Number/signal type  6 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)
   Connectors  6 x 5 female BNC
   Nominal level  1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB, for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.3 Vp-p to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-44 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
 
Sync
   Input/output type  RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
   Input level  Analog or TTL: 0.5 V to 5 Vp-p
   Output level  TTL: 5 Vp-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Max. input voltage  5.0 Vp-p
   Max. propagation delay  35 ns
   Max. rise/fall time  4 ns
   Polarity  Positive or negative (follows input)
 
Control/remote
   Contact closure  1 female 9-pin D connector
   Contact closure pin configuration  Pin 1 = mute output #1, pin 2 = mute all outputs, pin 3 = reserved, 
pin 4 = mute output #2, pin 5 = GND, pin 6 = mute output #3, 
pin 7 = mute output #4, pin 8 = mute output #5, pin 9 = mute output #6
 
General
   Power  100 VAC to 240 VAC, 50-60 Hz, 10 watts, internal
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Verhuurder Afstand Prijs  
BES Event Service
Noordwijkerhout
€ 20,00
1 stuk(s)
In winkelwagen Meer informate
Impress AV
Cuijk
€ 75,00
4 stuk(s)
In winkelwagen Meer informate