IT Geluid Communicatie Kabels Licht Sets Rigging Special FX Video Conference Diversen Decor & Stage

Home / Video / Randapparatuur / Verdelers & Splitters / Extron P/2 DA2xi
In winkelwagen

Extron P/2 DA2xi

ideo
   Gain   
      P/2 DA2xi  Output: 0 dB or 0.4 dB, selectable
Local monitor output: unity
   
   Peaking   
      P/2 DA2xi  Output: selectable, 0.7 dB or 1.4 dB at 100 MHz 
Local monitor output: fixed
        
   Bandwidth  350 MHz (-3 dB)
 
Video input
   Number/signal type  1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video
   Connectors  1 female 15-pin HD
   Pin connections  ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through). 
Pin 9 is floating.
   Nominal level  1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels  Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 135 kHz
   Vertical frequency  30 Hz to 170 Hz
   Return loss  <-38 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
   Input coupling  DC
 
Video output
   Number/signal type  1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video (follows input type)
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through (ID bits are passed through.)
   Connectors  2 female 15-pin HD
   Nominal level  1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video at unity gain
   Minimum/maximum levels  Analog, 0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
 
Sync
   Input type  RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
   Output type  RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
   Output type  RGBHV, RGBS, RGsB, RsGsBs
   Input level  1.5 V to 5.0 Vp-p
   Output level  TTL, 5 Vp-p, unterminated
   Input impedance   
      P/2 DA2xi  <1k ohm (default) or 10k ohms, selectable
        
   Output impedance  75 ohms (default) or 50 ohms, selectable
   Max. propagation delay  60 ns
   Max. rise/fall time  4 ns
   Polarity  Positive or negative (follows input)
 
Audio — P/2 DA2xi MT only
   Gain  Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response  20 Hz to 20 kHz, +0.05 dB, -0.1 dB
   THD + Noise  0.03% @ 1 kHz at nominal level
   S/N  >90 dB (balanced) at maximum output
   Crosstalk  <-80 dB @ 1 kHz, fully loaded
   Stereo channel separation  >80 dB @ 1 kHz, >60 dB @ 20 kHz
   CMRR  >67 dB @ 20 Hz to 20 kHz
 
Audio input — P/2 DA2xi MT only
   Number/signal type  1 stereo, unbalanced
   Connector  (1) 3.5 mm stereo jack, female; tip (L), ring (R), sleeve (GND)
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.1 dB channel to channel
   Nominal level  -2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output
   Maximum level  >+10 dBV (3.16 V) (unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
 
Audio output — P/2 DA2xi MT only
   Number/signal type  1 stereo, balanced/unbalanced
   Connectors  (1) 3.5 mm captive screw connector, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.1 dB channel to channel
   Nominal level  -2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output
   Maximum level (Hi-Z)  >+15 dBu (4.36 V), balanced at 1% THD+N, with external power supply
   Maximum level (600 ohm)  >+9 dBm (2.18 V), balanced at 1% THD+N, with external power supply
 
General
   External power supply  100 VAC to 240 VAC, 50-60 Hz, 4.5 watts, external; to 12 VDC, 1 A, regulated
   Power input requirements  12 VDC, 0.2 A
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Mounting   
      Rack mount  Yes, with optional 1U rack shelf
      Furniture mount   
         P/2 DA2xi  Yes, with optional under-desk mounting kit
   
      Pole mount  Yes, with optional pole mount kit
   Enclosure type  Metal
   Enclosure dimensions  1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight  0.5 lbs (0.3 kg)
   Shipping weight  3 lbs (2 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, KCC, VCCI
  • 350 MHz (-3 dB) RGB bandwidth fully loaded
  • Compatible with VGA-QXGA resolutions
  • Gain and peaking controls
  • Rack-mountable or portable
  • Current Draw : 1 Amps
  • Number of Inputs : 2
  • Number of Outputs : 2
  • Active Power : 4.50 Watt
  • Operating Temperature (Maximum) : 50 C
  • Operating Temperature (Maximum) : 122 F
  • Rack Units (Height) : 1
  • Shipping Weight : 1.36 kg
  • Shipping Weight : 3 lbs
  • DC Voltage : 12 Volts
  • Rackmountable : Yes
  • Product Weight : 0.23 kg
  • Depth : 76.20 mm
  • Warranty (Length/Type) : 3 Years Part and Labor
  • Width : 109.22 mm
  • AC Voltage (Minimum) : 100 Volts
  • Height : 25.40 mm
  • AC Voltage (Maximum) : 240 Volts
  • Operating Temperature (Minimum) : 0 C
  • Operating Temperature (Minimum) : 32 F
  • Certifications : CE FCC Class A VCCI AS/NZS ICES UL
Locatie Haarlem
Verhuurder Showrent Holland BV
Afstand
Aantal beschikbaar 1 stuk(s)
Prijs p/d € 5,00
  In winkelwagen

Rent Around

E: info@rentaround.nl


        

Informatie

Assortiment