IT Geluid Communicatie Kabels Licht Sets Rigging Special FX Video Conference Diversen Decor & Stage

Extron P/2 DA6xi

/2 DA4xi, P/2 DA6xi
 
Video
   Gain  0 dB or +3 dB (when input is 0.7 Vp-p, output is 0.7 V or 1.0 V), switchable
   Bandwidth  350 MHz (-3 dB), fully loaded
 
Video input
   Number/signal type  1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video
    NOTE     These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V.
   Connectors  1 female 15-pin HD (optional Mac/VGA adapters are available)
   Pin connections  ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through).
The pin 9 connection is passed through to output 1.
   Nominal level  1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 135 kHz
   Vertical frequency  30 Hz to 150 Hz
   Return loss  <-40 dB @ 5 MHz
   Input coupling  DC
 
Video output
   Number/signal type   
     
      P/2 DA6xi  6 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)
    NOTE     These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V.
   Connectors   
    
      P/2 DA6xi  6 female 15-pin HD
   Nominal level  1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
 
Sync
   Input type  RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync
   Output type  RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync (follows input)
    NOTE     These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V.
   Input level  1.8 V to 5.0 Vp-p
   Output level  TTL: 5.0 Vp-p, unterminated
   Input impedance  510 ohms
   Output impedance  50 ohms
   Max. propagation delay  60 ns
   Max. rise/fall time  2 ns
   Polarity  Positive or negative (follows input)
 
General
   Power  Internal
100-240 VAC, 50-60 Hz, 12 watts
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Mounting   
      Rack mount  Yes, with optional 1U rack shelf
      Furniture mount  Yes, with optional under-desk mounting kit or through-desk mounting kit
   Enclosure type  Metal
   Enclosure dimensions  (1U high, half rack wide)
(4.1 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.)
   Product weight  0.9 kg
   Shipping weight  2 kg
   DIM weight   
      USA/Canada  1.7 kg
      International  2.0 kg
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, KCC, VCCI
Locatie GRONINGEN
Verhuurder Bano
Afstand
Aantal beschikbaar 5 stuk(s)
Prijs p/d € 35,00
  In winkelwagen