DMX interface
- Full compliance with USITT DMX-512 (1990) & 512-A standards
- Maximum number of transceivers on a single bus: 32 (compliant with the EIA/TIA RS-485 standard)
- Data Rate: 250 kbps (slew rate limited to minimise EMI)
- Electrostatic discharge protection: ±15kV
- DMX frame rate and frame size: Auto sensing
- Frame rate: 1 (min) to 44 (max) frames per second
- Frame size: 1 (min) to 512 (max) channels
- Loss of DMX input or radio link: After one second (if there is no resumption), the DMX output will cease to transmit and go into a high impedance mode.
- Recovery from loss of DMX input or radio link: Less than 1 second.
Power characteristics
- High voltage input: 90-260VAC
- Low voltage input: 12VDC (T-1 Pro and S-2: 12-24VDC)
- Average current (transmit mode): 450mA @ 12VDC
- Average current (T-1 receive mode): 200mA @12VDC
RF characteristics
- W-DMX TM uses Adaptive Frequency Hopping Spread Spectrum (AFHSS) and changes frequency every 910uS
- Operational frequency range: 2402-2479MHz (ISM band)
- EU/ASIA RF output power: 20dBm or 100mW
- FCC RF output power: 25dBm or 275mW
- Channel bandwidth: 1 MHz
- Sensitivity at 0.1% Packet Error Rate: 95dBm
- Tested link range 450m (Low power EU mode using standard antennae in an urban area)
Connectors
- N-type female antenna connector, N – RP-SMA adaptor included
- 2 Neutrik® XLR 5-pin gold plated DMX connectors
- 2 RJ45, DMX over Cat5 cable links
- 1 DC input, pluggable terminal strip, Phonix® MSTB 2,5
- 1 AC input, IEC-6C
Wireless Solutions Transmitter S1
Locatie |
Groningen |
Verhuurder |
Lichtpunt |
Afstand |
|
Aantal beschikbaar |
1 stuk(s) |
Prijs p/d |
€ 15,00 |
|
In winkelwagen
|