Hét online platform voor AV verhuurbedrijven
Focusrite TwinTrak Pro
MIC INPUT RESPONSE
- Gain range = 0 dB to 60 dB continuously variable
- Input impedance = 50Ω to 3K3Ω continuously variable
- EIN = 128 dB measured at 60 dB of gain with 150Ω terminating impedance and 20 Hz/22 kHz bandpass filter
- THD at minimum gain (0 dB) = 0.0004% measured with +16 dBu input signal and with a 20 Hz/22 kHz bandpass filter
- THD at maximum gain (60 dB) = 0.003% measured with a –36 dBu input signal and with a 20 Hz/22 kHz bandpass filter
- THD at maximum input level (26.5 dBu) = 0.005% measured with a 20 Hz/22 kHz bandpass filter
- Frequency response at minimum gain (0 dB) = flat at 10 Hz and –2 dB down at 200 kHz
- Frequency response at maximum gain (60 dB) = –2 dB down at 10 Hz and 200 kHz
- CMRR at full gain (60 dB) = 80 dB
LINE INPUT RESPONSE
- Gain range = -10 dB to +10 dB continuously variable
- Input impedance = 10KΩ from 10 Hz to 200 kHz
- Noise at main output with gain set to 0 dB = -94 dBu measured with a 20 Hz/22 kHz bandpass filter
- Noise at –10 dBV output with gain at 0 dB = -100 dBu measured with a 20 Hz/22 kHz bandpass filter
- Signal to noise ratio relative to max headroom (27 dBu) = 121 dB
- Signal to noise ratio relative to 0 dBfs (+22 dBu) = 116 dB
- THD at unity gain (0 dB) = 0.0006% measured with 0dBfs (+22 dBu) input signal and with a 20 Hz/22 kHz bandpass filter
- Frequency response at unity gain (0 dB) = 0.1 dB down at 10 Hz and –3 dB down at 200 kHz
INSTRUMENT INPUT RESPONSE
- Gain range (High Gain switch out) = 0 dB to 20dB continuously variable
- Gain range (High Gain switch in) = 20 dB to 40dB continuously variable
- Input Impedance = > 1 MegΩ
- Noise at minimum gain (0 dB) = -90 dBu measured with a 20 Hz/22 kHz bandpass filter
- Noise at maximum gain (40 dB) = -78 dBu measured with a 20 Hz/22 kHz bandpass filter
- THD at minimum gain (0 dB) = 0.006% measured with –10 dBu input signal and with a 20 Hz/22 kHz bandpass filter
- Frequency response at unity gain (0 dB) = 0.5 dB down at 10 Hz and –1 dB down at 200 kHz
- Frequency response at maximum gain (40 dB) = 6 dB down at 10Hz and –1dB down at 200KHz
OPTICAL COMPRESSOR
- Threshold hold range = -12 dBfs (10 dBu) to –42 dBfs (-20 dBu).
- Compressor ratio (Hard Ratio switch out) = 2.5:1
- Compressor ratio (Hard Ratio switch in) = 6:1
- Attack time (Slow Attack switch out) = 0.5 ms.
- Attack time (Slow Attack switch in) = 5 ms.
- Release time = 100 ms to 1 s and then auto release mode when the release knob is turned fully clockwise. Auto release creates a release time dependent upon the
- average level of the incoming signal.
- Noise = -94 dBu measured with a 20 Hz/22 kHz bandpass filter.
- Makeup gain = 0 to +21 dB.
COMPRESSOR SIDECHAIN INSERT
- Can be used to input an independent signal to trigger compression or to allow the sidechain audio to be sent in and out of the unit via an external processor, such as an EQ for frequency conscious compression and deessing of vocals.
- Connector is an unbalanced input and output on balanced (TRS) socket as follows:-
- Tip = Send (Output)
- Ring = Return (Input)
- Signal level equivalent to –6 dB below normal operating level.
MID SCOOP EQ
- EQ shape = Peak
- Centre frequency = Variable between 120 Hz and 2kHz
- Cut (Deep switch out) = -6 dB
- Cut (Deep switch in) = -12 dB
- Q (Deep switch out) = 1.5
- Q (Deep switch in) = 3
FX SEND
- Unbalanced output, signal level equivalent to –6 dB below normal operating level.
- Noise = -94 dBu measured with a 20 Hz/22 kHz bandpass filter.
- Maximum output signal level = +20 dBu
FX RETURN
- Balanced input
- Operating level = +4 dBu
HEADPHONES MIX
- Unbalanced output, signal level equivalent to –6 dB below normal operating level.
- Noise = -94 dBu measured with a 20 Hz/22 kHz bandpass filter.
- Maximum output signal level = +20 dBu
MONITOR INPUT
- Balanced input
- Operating level = +4 dBu
MONITOR OUTPUT
- Balanced output
- Operating level = +4 dBu
- Noise = -98 dBu measured with a 20 Hz/22 kHz bandpass filter and monitor level knob at maximum output level (fully clockwise).
- Maximum output signal level = +26 dBu
DAC PERFORMANCE
- Playback sample frequency = 32 kHz to 192 kHz.
- Maximum bit depth = 24 bit
- Maximum analogue output level = +21 dBu.
- Dynamic Range = 111 dB measured with A weighted filter.
- Wordclock BNC connector outputs a regenerated wordclock at the sample frequency contained within the SPDIF signal connected to the RCA connector.
OUTPUT METER
- Calibrated for 0 dBfs = +22 dBu and indicates the level after the output fader being sent to both the internal
- AD converter and the TwinTrak Pro XLR output.
- O/L LED is lit when any section of the unit (including the headphone output) reaches a level greater than 0dBfs (O/L: LED triggered at +22.4 dBu).
WEIGHT: 5 kg
DIMENSIONS: 482 mm (W) x 88 mm (H) x 180 mm (D)
focusrite-twintrack
| Locatie | Duiven |
| Verhuurder | Designed 2 Rock |
| Afstand | |
| Aantal beschikbaar | 1 stuk(s) |
| Prijs p/d | € 22,50 |
| In winkelwagen |
