Audio Technica AT2035

Features

• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Custom shock mount provides superior isolation
• Switchable 80 Hz high-pass filter and 10 dB pad
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Includes custom shock mount & protective pouch

Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Plar Pattern: Cardioid
• Frequency Range: 20-20,000 Hz
• Low frequency roll off: 80 Hz, 12 dB/octave
• Open circuit sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
• Impedance: 120 ohms
• Maximun input sound level:
  • 148 dB SPL, 1 kHz at 1% T.H.D.;
  • 158 dB SPL, with 10 dB pad (nominal)
     
• Noise: 12 dB SPL
• Dynamic range:  (typical) 136 dB, 1 kHz at Max SPL
• Signal to noise ratio: 82 dB, 1 kHz at 1 Pa
• Phantom power requirements: 11-52V DC, 3.8 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Weight: 403 g (14.2 oz)
• Dimensions:
  • 170.0 mm (6.69") long,
  • 52.0 mm (2.05") maximum body diameter
     
• Output connector: Integral 3-pin XLRM-type
• Accessoire furnished: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• Audio technica case style: R5