Rent Around

Outline

Fader Configuration 32 + 1 (Master)
Mixing Capacity
- Input Channels 48 (40 mono + 2 stereo + 2 return)
- Aux Buses 20 (8 mono + 6 stereo)
- Stereo Buses 1
- Sub Buses 1
Input channel functions 8 DCA Groups
I/O
- Inputs 32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
- Outputs 16 (XLR)
- Expansion slots 1
On-board processors DSP 8 Effects + 10 GEQ
USB: 34x34 USB Audio Interface, 2-track recording via USB Storage Device

General specifications

Sampling frequency rate: Internal 48 kHz
Signal delay: Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader: 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Total harmonic distortion: Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)
Frequency response: +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Dynamic range: 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Hum & noise level
- Equivalent input noise –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
- Residual output noise –85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk: –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Power requirements: 100–240 V 50/60 Hz
Power consumption: 120 W
Dimensions
- W 866 mm (34.1in)
- H 225 mm (8.9in)
- D 599 mm (23.6in)
Net weight 20.0 kg (44.1lb)
Accessories Quick Guide, Power Cord, CUBASE AI download information
Options Expansion Card, Foot Switch (FC5)
Others Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C

Yamaha TF5