Rent Around

Load Impedance: 2Ω/4Ω/8Ω
Max. Midband Output Power THD = 1%, 1kHz , Dual Channel: 1100W/800W/500W
Rated Output Power THD < 0,1%, 20Hz … 20kHz: 700W/350W/
Max. Single Channel Output Power Dynamic Headroom, IHF-A: 2200W/1200W/625W
Max. Single Channel Output Power Continuous, 1kHz: 1500W/950W/550W
Max. Bridged Output Power THD = 1%, 1kHz: 2200w(4Ω)/1600W(8Ω)
Maximum RMS Voltage Swing THD = 1%, 1kHz: 72V
Power Bandwith, ref. 1kHz THD =1%, half power @ 4 ohms: 10Hz … 60kHz
Voltage Gain, ref. 1kHz: 32,0 dB
Input Sensitivity at rated output power: +4,7 dBu (1,33 V rms)
THD at rated output power MBW = 80kHz, 1kHz: < 0,05%
IMD-SMPTE, 60Hz, 7kHz: < 0,02%
DIM 30, 3,15kHz, 15kHz: < 0,01%
Maximum Input Level: +22 dBu (9,76 V rms)
Crosstalk ref. 1kHz, at rated output power: < -80 dB
Frequency Response ref. 1kHz (- 1dB): 15Hz … 40kHz
Input Impedance active balanced: 20 kΩ
Damping Factor, 1kHz: > 300
Slew Rate: 35 V/µs
Signal to Noise Ratio, Amplifier A-weighted: 107,0 dB
Output Noise, A-weighted: < -70 dB
Output Stage Topology: Class H
Power Requirements: 100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured)
Power Consumption 1/8 max. output power @ 4 ohms: 660W *
Protections: Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling: Front-to rear, 3-stage fans
Ambient Temperature Limits: +5°C ... +40°C (40°F ... 105°F)
Safety Class: I
Dimensions (W x H x D) mm: 483 x 88,1 x 386,8
Weight: 16 kg (35,2 lbs)

Dynacord CL1600