Hét online platform voor AV verhuurbedrijven
Alle afstanden
< 3 km
< 5 km
< 10 km
< 15 km
< 25 km
< 50 km
< 75 km
Zoek
Rent Around gaat veranderen!
Home
Support
Inloggen
Registreren
Contact
IT
Geluid
Communicatie
Kabels
Licht
Sets
Rigging
Special FX
Video
Conference
Diversen
Decor & Stage
Alle afstanden
< 3 km
< 5 km
< 10 km
< 15 km
< 25 km
< 50 km
< 75 km
Zoek
Home
/
Geluid
/
Versterker
/
Eindversterkers
/
Lab Gruppen IPD 1200
In winkelwagen
Lab Gruppen IPD 1200
Specificaties
Informatie van verhuurder
Verhuurderinformatie
General
Number of amplifier channels 2
Max total output all channels driven 1200 W
Peak output voltage per channel 50 Vrms
Max. output current 16 Arms
Max output power (all channels driven)
2 ohms 500 W
4 ohms 600 W
8 ohms 300 W
16 ohms 150 W
Performance
THD 20 Hz - 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >102 dBA
Channel separation (Crosstalk) at 1 kHz >80 dB
Frequency Response 2 Hz – 42 kHz
Input impedance 18 kOhm
Common Mode Rejection (CMR) 50 dB
Output impedance 25 mOhm
Gain, Sensitivity and Limiters
SCVPL 70 V peak
Sensitivity for full power 6 dBu
Gain (all DSP controls set to 0 dB) 30.2 dB
Level adjustment (per channel) Software controlled from -inf to 0 dB
Connectors and Buttons
Analog input connectors (per ch.) Neutrik XLR, 3pin female
Analog input link connectors (per ch.) Neutrik XLR, 3pin male
AES input connectors (per ch.) Neutrik XLR, 3pin female
AES input link connectors (per ch.) Neutrik XLR, 3pin male
Output connectors (per ch.) Neutrik speakON / binding post
Buttons Power, Menu, Back, Mute (per ch.), Power
Encoder Adjust / Set
Cooling Single fan, front to rear airflow, no filter required, temperature controlled speed
Power
Nominal voltage 100 – 240 VAC
Operating voltage 60 – 265 V AC
Standby consumption <6.5 W
Mains connector IEC inlet
Dimensions
Dimensions (Rack rail to rear panel) W: 483 mm (19”), H: 44 mm (1 U), D: 272 mm (10.7”)
Dimensions (Overall incl. handles and rear support) W: 483 mm (19”), H: 44 mm (1 U), D: 344 mm (13.5”)
Finish
Finish Black anodized aluminum front and black / gray steel chassis
Approvals
Approvals CE, PSE, UL 60065, CAN/CSA-C22.2, No.60065:03, FCC part 15 Class A, EN 55103-1, EN55103-2, ROHS
TECH SPEC OVERVIEW
2 x 600 W at 4 ohms
Low mains current draw with proven IDEEA technology
Networked control via IntelliDrive Controller™ touch-based GUI
Ethernet network connection
AES3 and analog inputs with redundant failover
Link outputs for analog and AES3
Software-configured Speaker Protect Limiter
Fast network setup with auto-discovery and ID of amplifiers
Four-channel input mixer
*Integrated DSP includes:
40 real-time, multi-slope parametric equalizers
Adjustable high-pass and low-pass filters
Input delay (up to 2 s)
Output delay (up to 2 s)
Crossover with multiple filter types
100 user-definable presets
IPD LoadLibrary speaker presets
Backlit display with navigation buttons and encoder for front panel setup
Horizontal VU meters on display in operating mode
Mute buttons on front panel
Binding post and Neutrik speakON connectors
Outputs may be connected through either one (NL-4) or both speakONs
Universal power supply: 100 – 240 V at 50 or 60 Hz
Locatie
Apeldoorn
Verhuurder
Kugel Licht & Geluid B.V.
Afstand
Aantal beschikbaar
7 stuk(s)
Prijs p/d
€ 30,00
In winkelwagen
Tweet
Rent Around
E:
info@rentaround.nl
Informatie
Rent Around gaat veranderen!
Home
Support
Inloggen
Registreren
Contact
Assortiment
IT
Geluid
Communicatie
Kabels
Licht
Sets
Rigging
Special FX
Video
Conference
Diversen
Decor & Stage
Privacy verklaring
Disclaimer
Algemene voorwaarden
Rentaround - Alle rechten voorbehouden © 2024