Powersoft T604

Features

• The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors.
• Full control with a PC running Armonía where it can be in mixed groups with advanced EQ together with other Powersoft products.
• Control from the front panel display for preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
• Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
• Group controllable advanced EQ with raised cosine filters
• Large preset library
• Preset compatibility with X Series
• Very long FIR filters (42.6 ms)
• Control and monitoring through ArmoníaPlus

Specifications

• Number of channels: 4

• Single channel mode         
  • 2 Ω: 1500W
  • 4 Ω: 1500W​
  • 8 Ω: 1250W 
     
• Bridge mode
  • 4Ω 3000W
  • 8Ω 3000W

• Power supply: Universal, regulated switch mode
• Nominal power requirement: 100-240 V ±10%, 50-60 Hz
• Operating voltage: 90 V - 264 V

• Gain: 32dB
• Input sensitivity: 2.57 Vrms
• Max input level: 24 dBu
• Frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
• S/N ratio: > 110 dB (20 Hz - 20 kHz, A weighted)
• Crosstalk separation: < -70 dB @ 1kHz
• THD+N: < 0.1% (typical < 0.5%)
• IMD: < 0.1% (typical < 0.5%)
• Input impedance: 20 kΩ balanced

• AD Converter: 24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
• DA Converter: 224 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.003% THD+N
• Memory/presets: 256 MB (RAM) plus 512 MB flash for presets /
• Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
• Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
• Delay: 2 s (input) + 100 ms (output) for time alignment
• Limiters: TruePower™, RMS voltage, RMS current, Peak limiter
• Damping control: Active DampingControl™ and LiveImpedance™ measurement

• Indicators and Controllers:
  • 8 x Push-button - Setting operating parameters
  • 1 x Display - Settings and monitoring
  • 1 x Power switch - 
    ​

• AC main: 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
• Audio signal input: 4 x XLR - Signal input
• Loudspeakers:
  • 2 x speakON
  • Neutrik NL4MD
     
• Network/data:
  • 1 x Rj45 socket - RS485 data connection (non-DSP version)
  • 1 x Rj45 socket - DANTE®

• Dimensions (L x H x W): 484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
• Weight: 7.5 kg (16.5 lb)