Features
- The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors.
- Full control with a PC running Armonía where it can be in mixed groups with advanced EQ together with other Powersoft products.
- Control from the front panel display for preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
- Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
- Group controllable advanced EQ with raised cosine filters
- Large preset library
- Preset compatibility with X Series
- Very long FIR filters (42.6 ms)
- Control and monitoring through ArmoníaPlus
Specifications
General
Output power
- Single channel mode
- 2 Ω: 1500W
- 4 Ω: 1500W
- 8 Ω: 1250W
- Bridge mode
AC Main Power
- Power supply: Universal, regulated switch mode
- Nominal power requirement: 100-240 V ±10%, 50-60 Hz
- Operating voltage: 90 V - 264 V
Audio
- Gain: 32dB
- Input sensitivity: 2.57 Vrms
- Max input level: 24 dBu
- Frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
- S/N ratio: > 110 dB (20 Hz - 20 kHz, A weighted)
- Crosstalk separation: < -70 dB @ 1kHz
- THD+N: < 0.1% (typical < 0.5%)
- IMD: < 0.1% (typical < 0.5%)
- Input impedance: 20 kΩ balanced
DSP
- AD Converter: 24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
- DA Converter: 224 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.003% THD+N
- Memory/presets: 256 MB (RAM) plus 512 MB flash for presets /
- Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
- Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
- Delay: 2 s (input) + 100 ms (output) for time alignment
- Limiters: TruePower™, RMS voltage, RMS current, Peak limiter
- Damping control: Active DampingControl™ and LiveImpedance™ measurement
Front panel
- Indicators and Controllers:
- 8 x Push-button - Setting operating parameters
- 1 x Display - Settings and monitoring
- 1 x Power switch -
Connectors
- AC main: 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
- Audio signal input: 4 x XLR - Signal input
- Loudspeakers:
- 2 x speakON
- Neutrik NL4MD
- Network/data:
- 1 x Rj45 socket - RS485 data connection (non-DSP version)
- 1 x Rj45 socket - DANTE®
Construction
- Dimensions (L x H x W): 484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
- Weight: 7.5 kg (16.5 lb)
4 x 1.500W @ 4 Ohm
Per kanaal:
2Ω 1.500W
4Ω 1.500W
8Ω 1.250W
Max Power one channel 2Ω 1.500W
Max Power one channel 4Ω 2.200W
Max Power one channel 8Ω 1.250W
Locatie |
Raamsdonksveer |
Verhuurder |
RBS Showequipment |
Afstand |
|
Aantal beschikbaar |
4 stuk(s) |
Prijs p/d |
€ 52,50 |
|
In winkelwagen
|