Panasonic AW-RP150

Features

• Large touchscreen for easy usability
• New joystick for one-handed operation
• Simplified PTZ camera presets and tracing memory
• Intuitive design elements based on direct feedback from everyday robotic camera operators
• 3G-SDI Active Through Output, 5 x RS-422, LAN PoE+, 2 x GPIOs

• Power Requirements: 12 V DC (10.8 V to 13.2 V)
• Current Consumption: 1.0 A (Connector Input) 0.6 A (PoE+ power supply)
• Ambient Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
• Ambient Operating Humidity: 20% to 90% (no condensation)
• Storage Temperature: -20 °C to 50 °C (-4 °F to 122 °F)
• Weight: Approx. 3.2 kg (7.05 lb)
• Dimensions (W x H x D) (mm): 342 mm x 178 mm x 245 mm(excluding protrusions)
• Dimensions (W x H x D) (inch): 13-15/32 inches x 7 inches x 9-21/32 inches(excluding protrusions)
• Controller Supported Equipment: IP/RS422 AW-UE150W/K, AW-HR140*1, AW-HE130W/K*1, AW-HN130W/K*1, AW-UE70W/K*1, AW-UN70W/K*1, AW-HE40 Series*1, AW-HN40HW/HK*1, AW-HE38HW/HK*1, AW-HN38HW/HK*1

• Input: DC 12 V IN XLR 4-pin 3G-SDI IN SMPTE292 / 75 Ω (BNC x 1) Supported formats: 1080/59.94p*2, 1080/50p*2, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF
• Output: ACTIVE THRU OUT SMPTE292 / 75 Ω (BNC x 1)
• Input/Output: IP CONT: ======== 100BASE-TX ---------- PoE+ input ---------- Connection cable: LAN cable, max. 100 m (328 ft) ・When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended ・When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended ================ SERIAL CONT (RJ-45): ======== RS-422 (control signals for remote cameras), TALLY OUT ---------- Connecting cable: Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft) ---------- TALLY OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA ================ TALLY/GPIO 1 ======== D-sub 25-pin, female, inch thread ---------- TALLY IN : 10 inputs (for receiving photocoupler signals) ---------- GPI : 6 inputs (for receiving photocoupler signals) GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) ・Input/output switched with menu settings ================ GPIO 2 ======== D-sub 25-pin, female, inch thread ---------- GPI : 10 inputs (for receiving photocoupler signals) GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) ・Input/output switched with menu settings Reserve connectors: 2 connectors (For future expansion feature)
• LCD Display: 7-inch Touch Panel GUI Monitor (WVGA (800×480) )
• SD Memory Card Slot: SDHC / SDXC Memory Card Slot x 1

• No. of Connectable Cameras: 200 (IP), 5 (RS422)
• No. of Camera Selection Buttons: 10
• No. of Camera Groups: 20 (10 units per 1 group)

• Preset Memory: No. of memory : presets 100
• Tracing Memory: No. of cameras : Cam1 to Cam10 Recording time, no. of memory settings : Maximum 5 min. total per camera, maximum of 10 settings per camera

• No. of User Assignable Buttons: 6 + up to 10 on the LCD menu
• Pan / Tilt Speed Adjustment: 7 levels
• Tally LED display color: green / red