Pansonic AW-RP60GJ

Features

• Equipped with a 3.5-type LCD Screen
• New Joystick with Enhanced Operability
• Advanced Camera Adjustment
• Flexible Customization Features
• PoE Support

Specifications

• Power Requirements: 12 V DC (10.8 V to 13.2 V), 42 V to 57 V DC (Camera Input, PoE power supply)
• Current Consumption: 0.9 A (XLR connector input), 0.3 A (PoE power supply)
• Ambient Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
• Allowable Humidity Ranges: 20 % to 90 % (no condensation)
• Storage Temperature: -20 °C to 50 °C (-4 °F to 122 °F)
• Mass: 1.5 kg (3.31 lbs)
• Dimensions (W x H x D): W 210 mm x H 92 mm x D 177 mm (8-9/32 inches x 3-5/8 inches x 6-31/32 inches) (excluding protrusions)

• Input/Output    
  • DC 12 V IN: XLR 4‑pin
  • LAN (RJ-45) (with LED): 10BASE‑T/100BASE-TX, PoE input
    • Connecting cable: LAN cable, max. 100 m (328 ft)
      • When connecting the unit via a switching hub: Straight cable (category 5e), STP (Shielded Twisted Pair) cable recommended
      • When connecting the unit directly: Crossover cable (category 5e), STP (Shielded Twisted Pair) cable recommended
      • REMOTE: Available only for LAN (RJ45) control
         
  • SERIAL CONT (RJ-45)
    • RS‑422 (control signals for remote cameras), TALLY OUT
    • Connecting cable:
      • Straight cable (category 5e), max. 1000 m (3280 ft)
    • TALLY OUT:
      • Open collector output (negative logic)
      • Maximum voltage resistance DC 24 V, Maximum current 50 mA
  • TALLY/GPIO (D-sub 25-pin, female,inch thread)    
    • TALLY IN: Contact input (Status operation)
    • GPIO IN: Contact input (Trigger operation)
    • GPIO OUT: Open collector output (negative logic)
    • Maximum voltage resistance DC 24 V, Maximum current 10 mA
       
• LCD Display: 3.5 inch LCD (QHD: 960 x 540)
• Connection Specifications    
  • No. of Connectable Cameras: 200 (IP), 5 (RS422)
  • Remote Camera Selection: 5 (6 to 200 controlled from the LCD)
  • No. of Camera Groups: 20 (10 units/group)
  • No. of Memory Presets: 100