- Crossover : 560 Hz 4.2 kHz
- Depth : 558.80 mm
- Height : 367.54 mm
- Impedance : 10000 ohm
- Output Power : 3935 Watt (four channels; three x 1125 W one x 560 W)
- Sensitivity : 0 dBV
- Width : 1371.60 mm
- AC Voltage : 235 Volts
- CMRR : >50 dB typically 80 dB (50 Hz - 500 Hz)
- Power Handling : 3935 Watt
- Maximum SPL (Sound Pressure Level) : 140 dB
- Amplifier Type : Complementary power MOSFET output stages (class AB/H)
- THD IM TIM : <.02 %
- Transducer - Low/Low-Mid Frequency : Two 12 Inch cone drivers with neodymium magnets Nominal impedance: 4 ohms Voice coil size: 4 Inch Power-handling capability: 1200 W (AES)
- Transducer - Low/Mid-High Frequency : One 4 Inch compression driver Nominal impedance: 8 ohms Voice coil size: 4 Inch Diaphragm size: 4 Inch Exit size: 1.5 Inch Power handling capability: 250 W (AES)
- Transducer - Very-High Frequency : Three 2 Inch compression drivers Nominal impedance: 12 ohms Voice coil size: 2 Inch Diaphragm size: 2 Inch Exit size: 0.75 Inch Power handling capability: 100 W (AES)
- Product Weight : 106.59 kg
- Maximum load protection : 4 Ohms low low-mid and very-high channels; 8 Ohms mid-high channel
- Horizontal Symmetry : Yes
- Coverage Horizontal : 90 degrees
- Color : Black
- Minimum Frequency Response (Bandwidth) : 65 Hz
- Maximum Frequency Response (Bandwidth) : 17500 Hz
- Speaker Diameter (Driver) : 12 in
- Current Draw : 5.60 Amps
- Impedance (High Frequency) : 12 ohm
- Impedance (Mid Frequency) : 8 ohm
- Impedance (Low Frequency) : 4 ohm
- Power Handling (High Frequency) : 100 Watt
- Power Handling (Mid Frequency) : 250 Watt
- Power Handling (Low Frequency) : 1200 Watt
Meyer sound Milo set.
Bestaat uit :
14 x Milo 90
2 x Milo 120
2 x Riggingframe MG-3DM
2 x Milo 120-I insert
Locatie |
Volendam |
Verhuurder |
KTS Volendam |
Afstand |
|
Aantal beschikbaar |
16 stuk(s) |
Prijs p/d |
€ 120,00 |
|
In winkelwagen
|