RF characteristics
- Modulation wideband FM
- Frequency ranges 518–554, 626–662, 740–776, 786–822, 830–866 MHz
- Receiving frequencies
- 8 channel banks with up to 20 factory-preset channels each
- 1 channel bank with up to 20 freely selectable channels
- (1,440 frequencies, tunable in steps of 25 kHz)
- Switching bandwidth 36 MHz
- Nominal/peak deviation ±24 kHz / ±48 kHz
- Frequency stability ≤ ±15 ppm
- Receiver principle true diversity
- Sensitivity (with HDX, peak deviation) typ. 1.5 μV at 52 dBArms S/N ratio
- Adjacent channel rejection ≥ 70 dB
- Intermodulation attenuation ≥ 70 dB
- Blocking ≥ 80 dB
- Squelch
- 4 steps: Off
- Low: 5 dBμV
- Mid: 15 dBμV
- High: 25 dBμV
- Pilot tone squelch can be switched off
- Antenna inputs 2 BNC sockets (50 Ω)
- Cascading outputs 2 BNC sockets (50 Ω)
- gain: 0 dB ±2 dB (related to antenna inputs)
AF characteristics
- Noise reduction system Sennheiser HDX
- EQ presets (switchable, effect the line and
- monitor outputs):
- Preset 1: “Flat“ AF frequency response 40–18,000 Hz
- Preset 2: “Low Cut“ Cut approx. -3 dB at 200 Hz
- Preset 3: “HiBoost“ Boost approx. +6 dB at 10,000 Hz
- Preset 4: “Low Cut & Hi Boost“
- Cut: approx. -3 dB at 200 Hz
- Boost: approx.+6 dB at 10,000 Hz
- S/N ratio (at 1 mV and peak deviation) ≥ 115 dB(A) (AF OUT)
- THD (at nominal deviation and 1 kHz) ≤ 0.9 %
- AF output voltage (at peak deviation 1 kHzAF)
- +18 dBu to –22 dBu, adjustable in steps of 2 dB (transformer balanced)
- AF outputs 2 XLR-3M sockets
Overall unit
- Temperature range –10 °C to +55 °C
- Power supply 90–264 V AC
- Mains connector 3-pin; protection class I
- Booster supply voltage 11 V DC, cannot be switched off
- Max. booster current ≤ 150 mA (limited per antenna socket)
- Power consumption 40 VA
- Dimensions [mm] 436 x 215 x 43
- Weight approx. 3,500 g
Frequentie band B
(626-662 MHz)
Locatie |
Nieuwerkerk ad IJssel |
Verhuurder |
OKamp |
Afstand |
|
Aantal beschikbaar |
8 stuk(s) |
Prijs p/d |
€ 60,00 |
|
In winkelwagen
|