Hét online platform voor AV verhuurbedrijven
Alle afstanden
< 3 km
< 5 km
< 10 km
< 15 km
< 25 km
< 50 km
< 75 km
Zoek
Rent Around gaat veranderen!
Home
Support
Inloggen
Registreren
Contact
IT
Geluid
Communicatie
Kabels
Licht
Sets
Rigging
Special FX
Video
Conference
Diversen
Decor & Stage
Alle afstanden
< 3 km
< 5 km
< 10 km
< 15 km
< 25 km
< 50 km
< 75 km
Zoek
Home
/
Geluid
/
Microfoon & Draadloos
/
Draadloos
/
Ontvangers
/
Sennheiser EM 6000 Dante
In winkelwagen
Sennheiser EM 6000 Dante
Specificaties
Verhuurderinformatie
Features
19’’ 2-Channel receiver, 19 inch 1RU
Large 244 MHz switching bandwidth
Legendary Long Range mode (LR) with proprietary audio codec (SeDAC) from the masterpiece Digital 9000
True bit diversity utilizes both receiver paths, combines their information content to provide the best possible signal
Equidistant frequency grid for maximum channel density and simplest setup
32 superior quality RF pre-selection filters for optimal suppression of interference signals at antenna input
Error correction and audio error masking
AES-256 encryption
Automatic frequency setup
Digital and transformer balanced analog outputs XLR, 6.3 mm jack, AES-3, EM 6000 Dante with Brooklyn II Card and Amphenol RJ-45
Integrated antenna splitter for cascading of up to 8 systems
One high-quality OLED display per channel
Link Quality Indicator (LQI)
Wireless Systems Manager (WSM) compatible
Compatible with standard Sennheiser UHF antennas
Compatible with Digital 9000 transmitters in Long Range mode
Specifications
Dimensions: 44 x 483 x 373 mm
Frequency response: 30 Hz - 20 kHz (1.5 dB)
THD, total harmonic distortion: < 0.03 % (@ 1 kHz)
Weight: Approx. 5.2 kg
Power consumption: Max. 35 W
Audio output:
Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bit
Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit
Can be externally synchronized using WCLK loop-through with BNC sockets
Analog Audio Outputs: XLR-3 and 6.3 mm jack per channel (transformer balanced) -10 dBu to +18 dBu in steps of 1 dB (2 kΩ)
Storage temperature: -25°C to +70°C
Operating temperature: -10°C to +50°C
Switching bandwidth: 244 MHz
Power supply: 90 - 240 V AC, 50/60 Hz
Antenna connector: Input 2x BNC (50 Ω), 12 V DC, max. 200 mA each via antenna sockets, short circuit proof, Output 2 x BNC (50 Ω)
Dynamic range: 111 dB (A) type
Frequency range: 470 - 714 MHz
Headphone output level: 6.3 mm jack, 2x 100 mW at 32 Ω
Image rejection: > 100 dB typ.
Sensitivity: -100 dBm typ.
Word clock
Input: BNC, 75 Ω
Output: BNC, 75 Ω
Sampling Rates: 48 kHz, 96 kHz
Operating relative humidity
Operation: Max. 85% at 40°C (non-condensing)
Storage: Max. 90% at 40°C (non-condensing)
Transmission method: Digital modulation, “LR” mode Min. frequency spacing for equidistant grid: 325 kHz
Latency
Analog Audio Out: 3 ms
Digital Audio Out: 3 ms (AES/EBU)
Audio codec: SeDAC (Sennheiser Digital Audio Codec)
Network protocol: IEEE 802.3-2002 (10/100 Mbit/s), shielded RJ-45 connection
Receiver Principle: Double superheterodyne
Diversity principle: True bit diversity
Encryption: AES 256
Daisy chain outputs: 2x BNC (50 Ω) 0 dB +/- 0.5 dB amplification relative to antenna inputs
Receiving channels: 2
Daisy-chained receivers (RF): Max. 8 EM 6000 units
Dante™ (only EM 6000 DANTE): IEEE 802.3 (1000 Mbit/s), shielded RJ-45 connection
Power plug: 3-pin, protection class I as per IEC/EN 60320-1
Water Protection Code: The product must not be exposed to dripping and splashing (IP2X)
Locatie
Zaandam
Verhuurder
P&P Performance
Afstand
Aantal beschikbaar
2 stuk(s)
Prijs p/d
€ 80,00
In winkelwagen
Tweet
Rent Around
E:
info@rentaround.nl
Informatie
Rent Around gaat veranderen!
Home
Support
Inloggen
Registreren
Contact
Assortiment
IT
Geluid
Communicatie
Kabels
Licht
Sets
Rigging
Special FX
Video
Conference
Diversen
Decor & Stage
Privacy verklaring
Disclaimer
Algemene voorwaarden
Rentaround - Alle rechten voorbehouden © 2024