- Flat response curve for accurate reproduction of sound sources
- Low noise and high output clipping level
- Low distortion over a wide range of load impedance
- Cardioid polar pattern uniform with frequency and symmetric about axis providing maximum rejection and minimum coloration of off-axis sounds
- Low RF susceptibility
- Selectable low-frequency response (flat 6 or 18 dB/octave rolloff )
- 0dB/10dB lockable attenuator switch
- Phantom powering (DIN 45 596 voltage of 12 to 48Vdc)
- Rugged steel construction for durability
- Field-usable over wide range of temperature and humidity conditions
- Impedance : 150 ohm
- Sensitivity : -45 dBV
- Total Harmonic Distortion : Less than 0.5% (131dB SPL at 250Hz into 800 ohm load)
- Width : 23.50 mm
- Shipping Weight : 0.45 kg
- Storage Humidity : 0 to 95% relative humidity at room temperature (72°F to 80°F 22°C to 27°C)
- Power Supply Voltage : 11 to 52Vdc positive pins 2 and 3
- Regulatory Compliance : CE EMC
- Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Case : Steel construction with vinyl metallic paint finish and stainless steel screens
- Furnished Accessories : Swivel Adapter A57F 10dB Attenuator Lock 34A830 Carrying/Storage Case 65A1797 Windscreen 49A111
- Hum Pickup : â??3dB equivalent SPL in a 1 mOe field (60Hz)
- Recommended Minimum Load Impedance : 800 ohms (may be used with loads as low as 150 ohms with reduced clipping level)
- Cartridge Capacitance : 54 pF
- Clipping Level at 1000Hz : 800 ohm load: â??4dBV (0.63 V); 150 ohm load:15dBV (0.18 V)
- Self-Noise : 16dB typical A-weighted; 19dB typical weighted per DIN 45 405 (equivalent sound pressure levels; measured with true rms voltmeter)
- Output Configuration and Connector : Balanced transformer-coupled output; male XLR connector
- Overvoltage and Reverse Polarity Protection : Maximum external voltage applied to pins 2 and 3 with respect to pin 1: + 52Vdc Reverse polarity protection: 200mA maximum (diode-clamped)
- Low Frequency Response Switch Positions : Flat -6dB/octave below 100Hz -18dB/octave below 80Hz
- Attenuator Switch Positions (Lockable) : 0 or -10dB
- Power Current Drain : 1.2 mA maximum
- Maximum SPL (Sound Pressure Level) : 136 dB
- Product Weight : 0.23 kg
- Wireless : No
- Minimum Frequency Response (Bandwidth) : 20 Hz
- Maximum Frequency Response (Bandwidth) : 20 kHz
- Signal to Noise Ratio : 78 dB
- Operating Temperature (Maximum) : 74 C
- Operating Temperature (Minimum) : 29 C
Shure SM81LC unidirectional condensator microfoon
Microfoon word geleverd incl klem
Microfoon word geleverd incl windscreen
Microfoon word geleverd incl een spare versie.
Locatie |
Stompwijk |
Verhuurder |
de WinterAudioService (WAS) |
Afstand |
|
Aantal beschikbaar |
5 stuk(s) |
Prijs p/d |
€ 10,00 |
|
In winkelwagen
|