Wide flat response for optimum musical instrument sound reproduction
Full spectrum soundâ??no presence peak or low-end rolloff
Cardioid polar pattern that is uniform with frequency and symmetrical about axis for maximum rejection of unwanted sound and minimum of-axis coloration
Very low susceptibility to RF and electromagnetic hum
Low distortion output and wide dynamic range for variety of load impedances
Shockâ??mounted cartridge for reduced handling noise
Accepts 12 to 48 Vdc phantom power
Rugged allâ??metal construction
Usable over wide range of environmental conditions
Builtâ??in battery power backup
Connector : XLR professional audio 3â??pin
Impedance : 150 ohm
Power : Phantom operation; supply voltage: 11 to 52 Vdc (+) pins 2 and 3; current drain: 1.0 TO 1.2 mA maximum at 52Vdc
Sensitivity : -49 dBV
Total Harmonic Distortion : <0.25% (130dB SPL at 250Hz into 800 ohm load)
Shipping Weight : 0.91 kg
Storage Humidity : 0% to 95% relative humidity at room temperature (72°F to 80°F 22°C to 27°C)
Regulatory Compliance : CE EMC
Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Case : Steel and brass construction with gray finish and stainless steel mesh grille
Furnished Accessories : Swivel Adapter A25D Carrying/Storage Bag 26A13
Hum Pickup : â??3dB equivalent SPL in a 1 millioersted field (60Hz)
Recommended Minimum Load Impedance : 800 ohms
Overvoltage Protection : Maximum external voltage applied to pins 2 and 3 with respect to pin 1: +52Vdc; reverse polarity protected to 75 Vdc
Cartridge Capacitance : 24 pF
Battery Operation : Type: 1.5 V alkaline AA size (NEDA 15A); Life: Up to 5000 hours with fresh battery