Long range transmitting: Transmit power control and distance control (ACK timeout).
Signal Strength Display: LED indicators have the best transmit and receive signal for traffic communication. And RF signal strength status shown LEDs of 3 colors, making network build-up easier.
Narrow Bandwidth: Provide 5MHz/10MHz/20MHz bandwidth selection.
Multiple SSID: 4 SSID supported. Each SSID can set itself wireless or WAN access setting.
QoS(WMM): Enhance performance and density.
Networking
PPPoE
Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected.
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks.
VPN Pass Through
Security
802.11i: WEP, WPA, WPA2 (Encryption support TKIP/AES).
MAC address functions: MAC address filter (AP mode)
802.1x: IEEE802.1x Authenticator
Station isolation: L2 Isolation
Management
Firmware Upgrade: Upgrading firmware via web browser, setting are reserved after upgrade.
Reset & Backup: Reset to factory default. User can export all setting into a file via WEB