Hét online platform voor AV verhuurbedrijven
HP ProCurve Switch 1700-24
The features of the ProCurve Switch 1700-24 include:
- 22 auto-sensing 10/100Base-TX RJ-45 ports and 2 Gigabit combination ports (RJ-45/SFP).
- plug-and-play networking—all ports are enabled—just connect the network cables to active network devices and your switched network is operational.
- IEEE 802.3ab Auto MDI /MDI-X on all twisted-pair ports, meaning that all connections can be made using straight-through twisted-pair cables. Cross-over cables are not required, although they will also work. The pin operation of each port is automatically adjusted for the attached device: if the switch detects that a 10/100 Mbps switch or hub is connected to the port, it configures the port as MDI; if the switch detects that a 10/100 Mbps end-node device is connected to the port, it configures the port as MDI-X.
- Automatic learning of the network addresses in each switch’s 8000-address forwarding table.
- Automatically negotiated full-duplex operation for all RJ-45 ports when connected to other auto-negotiating devices.
- The mini-GBIC ports always operate at full duplex.
- Easy management of the switch through several available interfaces:
- Web browser interface — an easy to use built-in graphical interface that can be accessed from common Web browsers.
- •ProCurve Manager (PCM) — allows network administrators to discover and map the ProCurve Switch 1700 within their network and launch the ProCurve Switch 1700's built-in graphical interface from within PCM to configure the switch.
- Support for up to 64 IEEE 802.1Q-compliant VLANs so you can divide the attached end nodes into logical groupings that fit your business needs.
- Support for up to 12 trunks so you to assign physical links to one logical link (trunk) that functions as a single, higher-speed link providing dramatically increased bandwidth.
- Support for many advanced features to enhance network performance— for a description, see the management and Configuration Guide
- Download of new switch software for product bug fixes.
- Supports pass through (flooding) of spanning tree BPDUs so that upstream devices on the network which support Spanning Tree Protocol can detect loops that exist on the ProCurve Switch 1700 interface.
| Locatie | Haarlem |
| Verhuurder | Netstar Audiovisueel |
| Afstand | |
| Aantal beschikbaar | 2 stuk(s) |
| Prijs p/d | € 20,00 |
| In winkelwagen |
