Features
- Stunning Wi-Fi Performance: Provide a great user experience no matter how challenging the environment with BeamFlex+ adaptive antenna technology and a library of 4K+ directional antenna patterns.
- Serve More Devices: Connect more devices simultaneously with four MU-MIMO spatial streams and concurrent dual-band 2.4/5GHz radios while enhancing non-Wave 2 device performance.
- Get Optimal Throughput: ChannelFly dynamic channel technology uses machine learning to automatically find the least congested channels. You always get the highest throughput the band can support.
- Multiple Management Options: Manage the R710 from the cloud, with on-premises physical/virtual appliances, or without a controller.
- Better Mesh Networking: Reduce expensive cabling, and complex mesh configurations by checking a box with SmartMesh wireless meshing technology to dynamically create self-forming, self-healing mesh networks.
- Expanded Backhaul: Pair two onboard 1GbE ports with link aggregation (LACP) to maximize throughput between the AP and wired switch.
- More Than Wi-Fi: Enhance your network with Cloudpath security and management software, SPoT real-time Wi-Fi location engine and analytics software, and SCI network analytics.
Specifications
Overview
- Description: High-end 802.11ac Wave 2 AP with MU-MIMO and BeamFlex+
- Maximum PHY Rate
- 1,733 Mbps (5GHz)
- 800 Mbps (2.4GHz)
- Wi-Fi Technology
- 802.11ac Wave 2 (5GHz)
- 802.11n (2.4GHz)
- Concurrent Users: 512
- Radio Chains:Streams: 4x4:4
- BeamFlex Gains: 6dB
- Max. Interference Mitigation: 15dB
- PD-MRC: Yes
- Rx Sensitivity: -104dBm
- ChannelFly: Yes
- Smart Meshing: Yes
- USB: Yes
- Ethernet Ports: 2
Wi-Fi
- Wi-Fi Standards: IEEE 802.11a/b/g/n/ac Wave 2
- Supported rates
- 802.11ac: 6.5 to 1,733Mbps (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)
- 802.11n: 6.5 Mbps to 800Mbps (MCS0 to MCS31)
- 802.11a/g: 54, 48, 36, 24, 18, 12, 9 , 6Mbps
- 802.11b: 11, 5.5, 2 and 1 Mbps
- Supported channels
- 2.4GHz: 1-13
- 5GHz: 36-64, 100-144, 149-165
- MIMO
- Spatial Streams
- 4 streams for SU-MIMO
- 3 streams for MU-MIMO
- Channelization: 20, 40, 80MHz
- Security
- WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i, Dynamic PSK
- WIPS/WIDS
- Other Wi-Fi Features
- WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v
- Hotspot
- Hotspot 2.0
- Captive Portal
- WISPr
RF
- Antenna type
- BeamFlex+ adaptive antennas with polarization diversity
- Adaptive antenna that provides up to 4000+ unique antenna patterns per band
- Antenna gain (max): 3dBi for both 2.4 and 5GHz
- Peak transmit power (aggregate across MIMO chains): 28dBm for both 2.4GHz and 5GHz
- Minimum receive sensitivity*: -104dBm
- Frequency bands
- ISM 2.4-2.484GHz
- U-NII-1 5.15-5.25GHz
- U-NII-2A 5.25-5.35GHz
- U-NII-2C 5.47-5.725GHz
- U-NII-3 5.725-5.85GHz
2.4GHz Receive Sensitivity
- MCS0 HT20: -97
- MCS7 HT20: -79
- MCS0 HT40: -94
- MCS7 HT40: -77
5GHz Receive Sensitivity
- MCS0 VHT20: -98
- MCS7 VHT20: -80
- MCS0 VHT40: -94
- MCS7 VHT40: -77
- MCS0 VHT80: -91
- MCS7 VHT80: -74
2.4GHz Tx Power Target
- MCS0 HT20: 22
- MCS7 HT20: 19
5GHz Tx Power Target
- VHT20: 22
- MCS0, VHT40: 22
- MCS7, VHT40, VHT80: 19
- MCS9, VHT40, VHT80: 16
Performance & Capacity
- Peak PHY rates
- 2.4GHz: 450Mbps
- 5GHz: 1300Mbps
- Client capacity: Up to 512 clients per AP
- SSID: Up to 32 per AP
Ruckus Radio Management
- Antenna Optimization
- BeamFlex+
- Polarization Diversity with Maximal Ratio Combining (PD-MRC)
- Wi-Fi Channel Management: ChannelFly
- Client Density Management
- Band Balancing
- Client Load Balancing
- Airtime Fairness
- Airtime-based WLAN Prioritization
- SmartCast Quality of Service
- QoS-based scheduling
- Directed Multicast
- L2/L3/L4 ACLs
- Mobility: SmartRoam
- Diagnostic Tools
- Spectrum Analysis
- SpeedFlex
Networking
- Controller platform support
- SmartZone
- ZoneDirector
- Unleashed*
- Standalone
- Mesh
- SmartMesh™ wireless meshing technology.
- Self-healing Mesh
- IP: IPv4, IPv6, dual-stack
- VLAN
- 802.1Q (1 per BSSID or dynamic per user based on RADIUS)
- Port-based
- 802.1x: Authenticator & Supplicant
- Tunnel: L2TP
- Policy Management Tools
- Application Visibility and Control
- Access Control Lists
- Device Fingerprinting
Physical Interfaces
- Ethernet
- Two 1Gbps Ethernet ports
- Power over Ethernet (802.3af/at/bt) with Category 5/5e/6 cable
- Link Aggregation (LACP)
- USB: 1 USB 2.0 port, Type A
Physical Characteristics
- Physical Size
- 22.7 cm (L), 21.3 cm (W), 6 cm (H)
- 8.9in (L) x 8.4in (W) x 2.4in (H)
- Weight: 1.12 kg (2.5 lb)
- Mounting Support
- Wall, acoustic ceiling, desk
- Secure bracket (sold separately)
- Physical Security
- Hidden latching mechanism
- Kensington Lock Hole
- T-bar Torx
- Operating Temperature: -4ºC (-14ºF) to 60ºC (140ºF)
- Operating Humidity: Up to 95% non-condensing
Power
- 802.3af
- 2.4GHz: 2x4, 19dBm per chain
- 5GHz: 4x4, 20dBm per chain
- Functional Limitation: 2nd Ethernet disabled USB disabled
- Max Power Consumption: 25W, including USB loading and 100m cable
- 802.3at, PoE+/injector, VDC
- 2.4GHz: 4x4, 22dBm per chain
- 5GHz: 4x4, 20dBm per chain
- Functional Limitation: None
- Max Power Consumption: 25W, including USB loading and 100m cable
Ruckus R710, 802.11ac Wave 2 Wireless accespoint (high density, max 500 clients)
Locatie |
Lelystad |
Verhuurder |
Beheerd.Events |
Afstand |
|
Aantal beschikbaar |
11 stuk(s) |
Prijs p/d |
€ 99,00 |
|
In winkelwagen
|