Allen & Heath dLive S7000

Features

• 36 faders
• Fully assignable layout – 216 fader strips
• Harmony UI integrates screen and wrap-around controls
  • Dual 12” capacitive touchscreen
  • Gesture control – pinch, swipe, drag ‘n drop
  • Dedicated multi-mode EQ view
  • Configurable widget areas for Scenes, meters, FX and more
  • 3 pages of 6 assignable rotaries per screen
     
• 26 assignable SoftKeys
• Engineer’s Wedge and IEM fader strips
• Comprehensive multipoint metering
• Daylight visibility
• USB stereo recording and playback
• 8 XLR mic/line in, 8 XLR line out
• 2 digital st AES3 in, 3 digital st AES3 out
   
• Connection hub
  • Dual redundant GigaACE gigabit link to MixRack
  • 1x redundant DX link for I/O expansion
  • 2x I/O Ports – 128 ch 96 kHz each
  • 2x Network ports
  • Wordclock BNC I/O
  • Video output

Specifications

• Mic/Line XLR Inputs: Balanced XLR, +48V phantom power
• Mic/Line Preamp: Fully recallable
• Input Sensitivity: -60 to +15dBu
• Analogue Gain: +5 to +60dB, 1dB steps Pad -20dB Active PAD
• Maximum Input Level: +30dBu (PAD in)
• Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in)
• Mic EIN: -127dB with 150Ω source
• Phantom Power: Per socket, internal or external indication phantom power sensing, triggered at 24V
• Digital Inputs
  • AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
  • SRC on each pair, range 32k - 192kHz, with bypass option

• Analogue XLR Outputs: Balanced, Relay protected
• Output Impedance: <75Ω
• Nominal Output: +4dBu = 0dB meter reading
• Maximum Output Level: +22dBu
• Residual Output Noise:
  • -92dBu (muted, 20-20kHz)
  • -90dBu (muted, 20-40kHz)
• Digital Outputs
  • AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
  • 96kHz sampling rate, switchable to 48kHz, 44.1kHz

• Width x Depth x Height: 1325 x 728 x 413 mm
• Weight: 41kg (90lbs)

• Measured balanced XLR in to XLR out, 20-20kHz, minimum Gain, Pad out
• Dynamic Range: 110dB
• System Signal to Noise: -92dB
• Frequency Response: 20Hz - 30kHz +0/-0.8dB
• THD+N (analogue in to out): 0.0015% @ +16dBu output, 1kHz 0dB gain
• Headroom: +18dB 
• Internal operating Level: 0dBu
• dBFS Alignment: +18dBu = 0dBFS (+22dBu at XLR output)
• Meter Calibration: 0dB meter = -18dBFS (+4dBu at XLR out)
• Meter Peak indication: -3dBFS (+19dBu at XLR out)
• Sampling Rate: 96kHz +/- 20 PPM  
• ADC: 24-bit Delta-Sigma
• DAC : 24-bit Delta-Sigma
• Latency
  • 0.7 ms (MixRack XLR in to XLR out, Input to Mix)
  • + 5 samples, Surface to Mixrack (GigaACE hop)
  • + 8 samples, DX32 to Mixrack (DX hop)
     

• Fitted with:
  • MPS16 V1 300w: 0°C to 35°C (32°F to 95°F)
  • MPS16 V2 250w: 0°C to 40°C (32°F to 104°F)
     
• Mains Voltage Operating Range: 100-240V AC, 50/60Hz
• Mains Power Consumption
  • 300W max (MPS16 V1 300W) 
  • 250W max (MPS16 V2 250W)