DPA d:fine 4066 Omni In-Ear Zwart

Features

• Dual Ear-Worn & Dual In-Ear Monitor
• 110mm Boom
• Omnidirectional Microphone
• Low Profile Design

Specifications

• Directional Characteristic: Omnidirectional
• Principle of Operation: Pressure
• Cartridge Type: Pre-polarized condenser
• Frequency Range: 20 Hz - 20 kHz
• Frequency Range ± 2 dB: 20 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
• Sensitivity: Nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent Noise Level:
  • A-Weighted: Typ. 26 dB (A) re. 20 µPa (max. 28 dB (A))
  • ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
     
• Signal to Noise Ratio: A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB (A)
• Total Harmonic Distortion (THD): <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
• Dynamic Range: Typ. 97 dB
• Maximum SPL: Peak Before Clipping: 144 dB
• Output Impedance
  • From MicroDot: 30 - 40 ohms
  • From DAD6001-BC: 100 ohms
     
• Cable Drive Capability: Up to 984' (300 m) with DAD6001-BC XLR adapter
• Output Balance Principle: Signal balanced with DAD6001-BC XLR adapter
• Common Mode Rejection Ratio: >60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
• Current Consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter
• Connector: MicroDot with TA5F adapter for Lectrosonics transmitters
• Boom Length: Microphone: Standard: 4.3" (110 mm)
• Capsule Diameter: 0.2" (5.4 mm)
• Cable Length: 4.3' (1.3 m)
• Cable Diameter:
  • Microphone Cable: 0.06" (1.6 mm)
  • In-Ear Cable: 0.08" (1.95 mm)
     
• Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
• Electro Magnetic Compatibility: Fully compatible
• Temperature Range: -40 to 113°F (40 to 45°C)
• Relative Humidity: Up to 90%
• Weight: 0.92 oz (26 g)