XTA DP226

Inputs: 2 electronically balanced

• Impedance: > 10k ohms.
• CMRR : >65dB 50Hz - 10kHz.

Outputs: 6 electronically balanced

• Source Imp: < 60ohms
• Min. Load: 600ohm
• Max. Level: +20dBm into 600 ohm

Frequency Resp.:+½dB 20Hz-20kHz
Dyn Range:>110dB 20Hz-20k unwtd
Distortion:< .02%@1kHz,+18dBm

• Maximum Delay: 650 mS
• Min Step Size: 2.6 μS

Input Gain: +6dB to -40dB in 0.1dB steps
Output Gain: +15dB to -40dB in 0.1dB steps and mute
Parametric Equalisation

• 8 per Input / 5 Sections per Output
• Filter Gain: +15dB to -30dB in 0.1dB steps.
• Freq. Range: 20Hz - 20kHz, 1/36 octave steps. (368 positions)
• Filter Q / BW: 0.4 to 128 / 2.5 to 0.008 (Sections switched to shelving response)
• Low frequency: 20Hz - 1kHz
• High frequency: 1kHz - 20kHz
• Shelf gains: ±15dB in 0.1dB steps.

High and Lowpass Filters

• Filters: 1 of each per output.
• Freq. Range HPF: 10Hz - 16kHz 1/36 octave steps.
• Freq. Range LPF: 35Hz - 22kHz 1/36 octave steps.

Responses:

• Bessel/Butterworth 12-18-24dB/Oct.
• Linkwitz-Riley 24dB/Oct.

Limiters

• Threshold: +22dBu to -10dBu
• Attack time: 0.3 to 90 milliseconds
• Release time: 2/4/8/16/32 x Attack time

Display:2x20 character backlit LCD
Input meter: 2 x 6 point, -24dB to digital clip.
Output meter: 6 x 6 point, -24dB to +4dB into limit.
Connectors

• Inputs: 3 pin female XLR
• Outputs: 3 pin male XLR.
• MIDI In: 5 pin DIN
• External: 9 pin DEE connector (RS232)
• RS485:3 pin male XLR (out) 3 pin male XLR (in)
• Power: 3 pin IEC

Power: 60 to 250V ±15% @ 50/60Hz.
Consumption: < 20 watts.
Weight : 3.5kg. Net (4.8kg.Shipping)
Size: 44 x 482 x 300mm excluding connectors.