Hét online platform voor AV verhuurbedrijven
Alle afstanden
< 3 km
< 5 km
< 10 km
< 15 km
< 25 km
< 50 km
< 75 km
Zoek
Rent Around gaat veranderen!
Home
Support
Inloggen
Registreren
Contact
IT
Geluid
Communicatie
Kabels
Licht
Sets
Rigging
Special FX
Video
Conference
Diversen
Decor & Stage
Alle afstanden
< 3 km
< 5 km
< 10 km
< 15 km
< 25 km
< 50 km
< 75 km
Zoek
Home
/
Geluid
/
Versterker
/
Eindversterkers
/
Powersoft Digam Q3002
Powersoft Digam Q3002
Specificaties
Verhuurderinformatie
General
Number of channels: 4
Output power
4-channel mode (EIAJ Test Standard, 1 kHz, 1% THD)
2Ω: 4 x 750 W
4Ω: 4 x 400 W
8Ω: 4 x 250 W
Mono-bridged mode (EIAJ Test Standard, 1 kHz, 1% THD)
4Ω: 2 x 1,500 W
8Ω: 2 x 800 W
Max output voltage: 63 V peak
AC Mains Power
Power supply: Universal, regulated switch mode with PFC (Power Factor Correction)
Operating voltage: 100 V - 240 V± 10%, 50 Hz - 60 Hz
Power factor cos (φ) >0.95 @ >200 W
Consumption / current draw
Idle: 162 VA
I/8 of max output power @ 4Ω: 250 VA
I/4 of max output power @ 4Ω: 500 VA
Thermal
Environmental operating temperature: 0° - 45° C / 32° - 113° F
Thermal dissipation: Fan, continuously variable speed, temperature controlled, front to rear airflow
Idle: 112 kcal/hr / 443 BTU/hr
I/8 of max output power @ 4Ω: 155 kcal/hr / 614 BTU/hr
I/4 of max output power @ 4Ω: 198 kcal/hr / 784 BTU/h
Audio
Gain: 32 dB
Input sensitivity @ 8Ω: 1.12 V / 3.2 dBu
Input filters: Internally selectable per channel: high/low/band pass, 12 dB/oct, off/65/100/130 Hz
Gate: Internally selectable per channel: off/-50 dBu
Input impedance: 10 kΩ
Frequency response: 5 Hz - 30 kHz (+/-3 dB)
THD+N / SMPTE IMD DIM100 IMD
typ. <0.1% (<0.5% @ >0.1 W)
typ. <0.01% (<0.02% @ >0.1 W)
S/N ratio (amplifier section): >105 dB(A)
Crosstalk separation: >70 dB @ 1 kHz
Slew rate: 40 V/μs @ 8Ω, input filter bypassed
Damping factor: >600 @ 100 Hz
Front Panel
Indicators
3 LED’s per channel for output level: 3 x green, 1 x yellow, 1 x red
2 status LED’s per channel: green for signal present (-66 dBV), red for protection
2 status LED’s: green for amplifier ready, yellow for thermal protection
Controls
1 stepped level attenuator pot per channel
Mains power on/off switch
Rear Panel
Audio signal input connectors: 4 x Combo XLR female/1/4” jack, electronically balanced
Loudspeaker output connectors: 4 x Speakon® NL4MD
Controls: 2 x link switch, linking inputs 1 & 2 and 3 & 4
AC mains: IEC C13 16 A (AC mains cord with 3-pin plug 15A for U.S., IEC ‘Schuko’ 16A for else)
Remote control interface (optional “R” version): RS485: 1 x RJ45 with 2 x rotary address switches
Construction
Dimensions: W 483 mm / 19”, H 44.45 mm / 1.75” / 1 RU, D 455 mm / 17.9”
Weight: 9.5 kg / 20.9 lbs
Side & rear reinforcement, front panel: 5 mm steel
Top & bottom lid, rear panel: 1 mm steel
Verhuurder
Afstand
Prijs
Tweet
Rent Around
E:
info@rentaround.nl
Informatie
Rent Around gaat veranderen!
Home
Support
Inloggen
Registreren
Contact
Assortiment
IT
Geluid
Communicatie
Kabels
Licht
Sets
Rigging
Special FX
Video
Conference
Diversen
Decor & Stage
Privacy verklaring
Disclaimer
Algemene voorwaarden
Rentaround - Alle rechten voorbehouden © 2024