Controls : 4 pushbuttons function depending on user menu
Depth : 474.98 mm
Height : 44.50 mm
Impedance : 100 ohm
Indicators : 7 meter LEDs: 5 x green 1 x yellow 1 x red top yellow and red show alarm with protect description on LCD panel
Memory : 8 MB (RAM) plus 2 MB (flash for presets)
Width : 482.60 mm
Shipping Weight : 12 kg
Slew Rate : 50 V/s @ 8 ohm input filter bypassed
Presets : 50 stored locally + 150 stored on a smartcard
A/D Converter : Dual 24bit 96 kHz Tandem® architecture with 127 dBA of dynamic range and THD <0.005% (20 Hz - 20 kHz)
D/A Converter : Dual 24bit 96 kHz Tandem® architecture with 122 dBA of dynamic range and THD <0.003% (20 Hz - 20 kHz)
Chassis : 1 mm / 0.04â?? steel chassis and removable dust cover ; 3 mm / 0.12â?? steel front panel screw hole protection side reinforcement & rear support
Power Switch : Mains switch
Crossover Filters : Butterworth Linkwitz-Riley Bessel Arbitrary Asymmetric 6dB/oct to 48dB/oct (IIR) linear phase (FIR) hybrid (FIR+IIR)
Maintenance : SmartCard reader/writer for firmware updates and preset storage. Easily accessible dust filter foam behind two steel covers
Mounting Width : 6.30 mm
Digital audio input : AES3 (glitchless fallback to analog audio selectable)
Limiters : Power limiter (TruePowerâ?¢ RMS voltage RMS current) + Peak Limiter
AC Mains : AMP CPC 45A on rear panel; AMP CPC 45A connector mounted on a 3 x 5mm2 (10AWG) cable
Minimum Frequency Response (Bandwidth) : 20 Hz
Maximum Frequency Response (Bandwidth) : 20 kHz
Signal to Noise Ratio : 106 dB
Operating Temperature (Maximum) : 45 C
Operating Temperature (Minimum) : 0 C
Input Equalizer : Three layers (PEQ raised cosine shelving) 32 filters each + group filters up to 256 filters per channel
Output Equalizer : 16 fully parametric filters per channel IIR: peaking hi/lo shelving hi/lo pass eq band pass band stop all pass. Custom FIR up to 384 taps @ 48 or 96 kHz
AC Voltage (Minimum) : 100 Volts
AC Voltage (Maximum) : 240 Volts
Crosstalk separation : > 66 dB @ 1 kHz
Network data port Ethernet : 2 x RJ45 with activity LEDs
Delay for time alignment : up to 4 s on the input section up to 32 ms per output sample-by-sample stepping
THD+N/SMPTE IMD/DIM 100 IMD : <0.5% from 1 W to full power (typically <0.05%)
Cable compensation network : up to 2 ohm negative/positive wire compensation (Active DampingControlTM)
Network data port AESOP incl. AES3 : 2 x RJ45 with activity LEDs
Audio signal input connectors : Analog: 2 x balanced Neutrik® Combo XLR female/1/4â?? jack; AES3: use channel 2 XLR
Loudspeaker output connectors : 2 x Neutrik® Speakon NL4MD