OUTPUT POWER (per channel)
8 ohms, 20 Hz to 20 kHz, 0.1% THD, 400 watts
8 ohms, 1kHz, 1% THD, 450 watts
4 ohms, 20 Hz to 20 kHz, 0.1% THD, 650 watts
4 ohms, 1 kHz, 1% THD, 700 watts
2 ohms, 1 kHz, 1% THD, 900 watts
OUTPUT POWER (bridged mono)
8 ohms, 20 Hz to 20 kHz, 0.1% THD, 1300 watts
4 ohms, 1 kHz, 1% THD, 1800 watts
DISTORTION (SMPTE-IM):
less than 0.05%
DISTORTION (typical):
less than 0.01% THD
4? to 8?: 20Hz-20kHz, 10 dB below rated power
1.0 kHz and below, full rated power
FREQUENCY RESPONSE:
20 Hz to 20 kHz, ±0.15 dB
8 Hz to 100 kHz, +0/-3 dB
DAMPING FACTOR:
Greater than 350
DYNAMIC HEADROOM:
1.9 dB at 4 ohms
NOISE:
108 dB below rated output (20 Hz to 20 kHz)
SENSITIVITY:
1.14 Vrms for rated power (8 ohms)
VOLTAGE GAIN:
50 (34 dB)
INPUT IMPEDANCE:
10K unbalanced, 20K balanced
CONTROLS:
Front: AC Switch, Ch 1 and Ch 2 Gain Knobs, Ch 1 and Ch 2 Clip Limiter switches
Back: Parallel/Stereo/Bridge Switch, Remote A.C. Power Control Terminal Strip
INDICATORS:
PROT: Red LED CLIP: Red LED, 1 per channel
STANDBY: Yellow LED LEVEL -10: Yellow LED, 1 per channel
PWR-ON: Green LED LEVEL -20: Yellow LED, 1 per channel
SIG-PRESENT: Green LED, 1 per channel
CONNECTORS: (each channel)
Input: Barrier strip and Neutrik “Combo” XLR and 1/4” input
Speakers: “Touch proof” binding posts
Data Port: HD15 female
COOLING:
Variable speed fan, rear-to-front air flow.
AMPLIFIER PROTECTION:
Full short circuit†, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads.
LOAD PROTECTION:
On/off muting. DC-fault power supply shut down.
OUTPUT CIRCUIT TYPE:
Complementary linear outputs.
POWER REQUIREMENTS:
120, 240 Vac, 50-60 Hz
POWER CONSUMPTION:
Normal Operation: 4 ohms per channel: less than 6.25 amps, 120 Vac (750 VA)
maximum (full power, 2 ohms per channel): 35 amps, 120 Vac (4200 VA)
DIMENSIONS:
48.3 cm rack mounting
8.9 cm tall (2 spaces)
45.5 cm deep (rear support ears)
WEIGHT:
8.2 kg net, 10.6 kg shipping