IT Geluid Communicatie Kabels Licht Sets Rigging Special FX Video Conference Diversen Decor & Stage

Shure The Vocal Artist T2/30 + T3

T3 Receiver:
  • Power Requirements: 12–18 Vdc nominal, 85 mA
  • Audio Output Level: (at 1 kHz modulation, 15 kHz deviation)
  • Unbalanced: –8.8 dBV
  • Audio Output Impedance: 3.3 kΩ
  • Output Connectors: 1/4 in. Unbalanced
  • Dimensions: 3.5 cm H x 15.2 cm W x 9.8 cm D
  • Weight: 192 g

T2/30 Hand Held Transmitter specs:
  • Power Requirements: 9 V alkaline battery (Duracell MN1604 recommended, 1 included); 8.4 V NiCad battery optional
  • Output Power: 50 mW, maximum
  • Current Drain: 30 mA, typical
  • Battery Life
    • 18 hours typical with fully charged 9 V alkaline battery,
    • 2 hours typical with fully charged NiCad battery
  • BG3.1 Hand–Held (T2/31)
    • Frequency Response: 60 to 14,000 Hz
    • Microphone Polar Pattern: Cardioid (unidirectional)
  • Dimensions: 22.2 cm H x 5.1 cm D
  • Weight:
    • T2/31 Microphone Transmitter: 275 g

BG3.1 Microfone specs:
  • Type: Dynamic
  • Frequency Response: 60 to 14,000 Hz
  • Polar Pattern: Cardioid (unidirectional), symmetrical about axis
  • Output Impedance: Microphone rated impedance is 150Ω (290Ω actual) for microphone inputs rated 75 to 300Ω
  • Output Level (at 1,000 Hz): Open Circuit Voltage* – 53.5 dBV/Pa ( 2.10 mV) *1 Pascal=94 dB SPL
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the microphone output connector
  • Environmental Conditions: This microphone will operate over a temperature range of –29 to 57˚C (–20 to 135˚F), and at relative humidity of 0 to 95%.
  • Switch: Built in On/Off switch
  • Connector: 3-pin male XLR connector designed to mate with Cannon XL series, Switchcraft A3 (Q.G.) series, or equivalent
  • Case: Die cast zinc handle, black matte finish, dent-resistant wiremesh steel ball grille
  • Dimensions:
    • Length: 163mm
    • Diameter grill: 56mm
    • Dimeter bottom: 19mm
  • Net Weight: 288 g
Verhuurder Afstand Prijs