QSC WL2102W

Features

• Patented multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and a near ideal vertical line source
• Exceptionally high output capability in a very compact form factor
• May be operated as a bi-amplified or tri-amplified system. DSP settings are available on Q-SYS, SC-28, PLD amplifiers and CXD amplifiers.
• Dual 10" long-excursion, high-power, low-frequency transducers
• Single 3" diaphragm neodymium compression driver
• Birch ply enclosures. Available with standard finish in black (WL2102-w-BK) or white (WL2102-w-WT).
• Fully captive hardware design incorporates all components necessary for box to box rigging

Specifications

• Configuration: Biamp or Triamp mode
• Transducers
  • High Frequency: 1.4" exit, 3" titanium diaphragm, neodymium magnet assembly
  • Low Frequency: 2 × 400 W, 16 ohm 10" woofer, 3" voice coil, ceramic magnet assembly
• Frequency Response (±3 dB): 55 Hz to 18 kHz (with recommended DSP processing)
• Frequency Response (-10 dB): 48 Hz to 20 kHz (with recommended DSP processing)
• Nominal Impedance
  • HF: 16 ohms 
  • LF biamp mode: 8 ohms 
  • LF triamp mode: 16 ohms (× 2)
• Continuous Power Capacity
  • HF: 80 W (2 hours, AES1984-2 method, 1 to 10 kHz)
  • LF biamp mode: 600 W (2 hours, AES1984-2 method, 80 to 800 Hz)
  • LF triamp mode: 400 W (×2) (2 hours, AES1984-2 method, 80 to 800 Hz)
• Max Recommended Power
  • HF: 300 W @ 16Ω
  • LF bi-amp mode: 1400 W @ 8Ω
  • LF tri-amp mode: 700 W @ 16Ω (x 2)
• Sensitivity (1 W at 1 m)
  • HF: 107.5 dB (single cabinet measured in free space.)
  • LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)
• Maximum Output (SPL at 1 m)
  • Continuous: HF: 127 dB / LF: 127 dB
  • Peak: HF: 133 dB / LF: 133 dB
• Maximum Output (dB SPL at 1 m)
  • Continuous: HF: 126 dB / 132 dB
  • Peak: LF: 122 dB / 128 dB
• Nominal Coverage
  • Horizontal: 140°
  • Vertical: Dependent on number of elements used

• Cabinet Type: Ported, trapezoidal
• Material: Baltic birch plywood
• Finish: Black (WL2102-w-BK) or white (WL-2102-w-WT) texture coat
• Grille: Perforated, formed powder coated steel
• Connectors: 2 x Neutrik Speakon® NL8 in parallel
• Attachment Points: Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 2 ° to 10° and 0°
• Weight: 83 lb (37.7 kg) net
• Dimensions (HxWxD): 27.3 cm × 69.85 cm × 51.43 cm