Hét online platform voor AV verhuurbedrijven
Nexo LS400
LS400 PRODUCT FEATURES
Components: VLF 1 x 12” ( 30cm ) Shielded Neodymium long excursion 6 Ohm driver.
Height x Width x Depth: 338 x 500 x 406 mm (13 1/4’’x 19 5/8’’x 16”).
Weight: 19.5 kg (43 lbs) net.
Connectors: 2 x NL4MP SPEAKON 4 pole.
Construction: Baltic Birch Ply & textured, polyurethane black coating.
Fittings: Handles 2, integral to cabinet.
Stand fittings: Internal Stand Fitting on Top (35mm, 1”3/8) accepts a mast supporting 1 or 2 PS8s.
SYSTEM SPECIFICATIONS LS400 with PS8 TDController
Frequency Response [a]: 43 Hz - 120 Hz ±3dB.
Usable Range @-6dB [a]: 40 Hz - 140 Hz.
Sensitivity 1W @ 1m [b]: 99 dB SPL Nominal.
Nominal Peak SPL @ 1m [b]: 128 to 131 dB Peak (300 to 700 W RMS Amp.)
Crossover Frequencies: 120 Hz Active through PS8TD.
Nominal Impedance: 6 Ohms.
Recommended Amplifiers: 300 to 700 Watts into 4 Ohms.
SYSTEM OPERATION
Electronic Controller: The LS400 Subwoofer must be used with a Nexo Controller (PS8 TD analogue, NX241 digital or PS8AMP integrated power amplifier). Use without a properly connected Controller will result in poor sound quality and may damage the components.
Subbass
The LS400 Subwoofer provides optional VLF extension for PS8 Loudspeakers. Active two-way operation with the PS8 is included in the PS8TD, NX241 or PS8AMP. One LS400 matches 2 xPS8, additional LS400 may be used for enhanced effect.
Speaker Cables
The PS8 is wired 2- & 2+ on Speakon connectors, LS400 on 1- & 1+. Loop through
Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS8 & 1 x LS400 in no particular order.
| Verhuurder | Afstand | Prijs | |
|---|---|---|---|
|
BSE
|
Groningen
|
€ 30,00
1 stuk(s)
|
In winkelwagen Meer informate |
|
DSA-AVL
|
Apeldoorn
|
€ 20,00
2 stuk(s)
|
In winkelwagen Meer informate |
|
MSE audiovisueel
|
Ridderkerk
|
€ 30,00
1 stuk(s)
|
In winkelwagen Meer informate |
