Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.
Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.
Powered by AA battery or phantom power supply.
Internal shock mount for reduced handling noise.
Durable metal construction.
On/off switch for onstage control.
Specifications
Microphone Type: Condenser (electret bias)
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
Frequency Response: 40 to 18,000 Hz
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
Maximum SPL: 2000 ohm load: 131 dB (phantom), 127 dB (battery)
Self-Noise (Equivalent SPL): 20 dB typical, A-weighted
Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level): 111 dB (phantom); 107 dB (battery)
Signal-to-Noise Ratio: 68 dB (IEC 651)* at 94 dB SPL
Power
Phantom Power
Supply Voltage: 11 to 52 Vdc
Current Drain: 2.0 mA max at 52 Vdc
Maximum Exteral Voltage Applied to Pins 2 and 3 with respect to Pin 1: +52 Vdc
Reverse polarity protected to: 100 Vdc
Battery Power
Recommended: 1.5 V alkaline AA size (NEDA 15A)
Life: up to 10,000 hour
Switch: Built-in On/Off switch
Case: Steel and brass construction with black painted finish
Environmental Conditions: This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.
Electromagnetic Hum Sensitivity: -7 dB equivalent SPL in a 1 millioersted field (60 Hz)