FBT Ventis 112A

Features

• 2-way, bi-amplified, bass reflex design
• Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
• Digital Signal Processor with graphic display
• 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
• High efficiency switch mode power supply
• Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
• 320mm (12”) LF woofer with 64mm (2.5”) voice coil, custom made for FBT
• 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
• Frequency response from 48Hz to 20 kHz
• 80°H x 50°V Constant Directivity Rotatable Horn
• 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
• Speaker stand socket, two aluminium handles
• 45° monitor taper

Specifications

• Code: 40641
• Configuration: 2 way
• Built-in amplifier LF/HF: 700/200 W RMS
• Built-in amplifier peak LF/HF: 1400/400 W
• Frequency response: 42Hz - 20KHz -6dB
• Low Frequency woofer: 12 - 2.5 coil inch
• High Frequency driver: 1 - 1.4 coil inch
• Maximum SPL cont/peak: 126/133 dB
• Dispersion: 80° x 50° rotatable HxV
• Input impedance: 22 Kohm
• AC Power requirements: 640 VA
• Input connector: XLR with loop, RCA ST
• Power cord: 5/16.4 m/ft
• Net Dimension (WxHxD): 387x665x380 / 12.23x26.18x14.96 mm/inch
• Net Weight: 20.6/45.41 Kg/lb
• Transport Dimension (WxHxD): 500x765x470 / 19.68x30.11x18.50 mm/inch
• Transport Weight: 23.1/50.92 Kg/lb