Meyer Sound Ultra-X40

Features

• Exceptional fidelity and surprising power capability delivered in a compact, light enclosure
• Extraordinarily flat amplitude and phase response ensures tonal accuracy and precise imaging
• Wide (ULTRA-X40) or Controlled (ULTRA-X42) pattern
• Rotatable horn provides installation flexibility
• Integral stand mount and QuickFly® mounting options facilitate rigging

Specifications

• Operating Frequency Range: 55 Hz – 19.5 kHz
• Frequency Response: 56 Hz – 19 kHz ± 4 dB
• Phase Response: 90 Hz – 19.5 kHz ±45°
• Linear Peak SPL
  • 132.5 dB with 18 dB crest factor (M-noise),
  • 130 dB (Pink Noise), 131 dB (B-noise)

• Rotatable horn: 110˚x50˚

• Low Frequency: Two 8-inch cone drivers; 4 Ω nominal impedance
• High Frequency: One 3-inch diaphragm compression driver connected to a rotatable horn; 8 Ω nominal impedance
  

• Type: Differential, electronically balanced
• Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
• Connectors: XLR 3-pin female input with male loop output; optional XLR 5-pin connector to accommodate both balanced audio and RMS signals.
• Input Impedance: 10 kΩ differential between pins 2 and 3
• Wiring
  • Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
  • Pin 2: Signal +
  • Pin 3: Signal –
  • Pin 4: RMS (polarity insensitive) Pin 5: RMS (polarity insensitive)
  • Case: Earth ground and chassis
     
• Nominal Input Sensitivity: 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
   
• Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
  

• Type: 3-channel, Class-D
• Total Output Power6: 1950 W peak
• THD, IM, TIM: <0.02%
• Cooling: Convection

• Connector: powerCON 20 input with loop output
• Automatic Voltage Selection: 90–265 V AC, 50–60 Hz 
• Safety Rated Voltage Range: 100–240 V AC, 50–60 Hz
• Turn-on and Turn-off Points: 90 V AC turn-on, no turn-off; internal fuse protection above 265 V AC

• Dimensions: W: 12.51 in (318 mm) x H: 22.31 in (567 mm) x D: 14 in (356 mm); D with handles: 15.38 in (391 mm)
• Weight: 52 lb (23.6 kg)
• Enclosure: Premium multi-ply birch with slightly textured black finish
• Protective Grille: Powder-coated, round-perforated steel
• Rigging: 11 integrated M8 threaded points; 35 mm Pole Mount with M20 thread; optional accessories for various rigging options (see accessories section).