Turbosound iQ8

Features

• 2 way full range loudspeaker for portable PA and installation applications
• 2,500 Watt power featuring KLARK TEKNIK Class-D technology
• KLARK TEKNIK Digital Signal Processing for total system control
• Speaker modelling includes accurate models of industry standard speakers
• SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
• ULTRANET digital audio networking connects to mixers and other sources
• 8" low frequency driver with low mass voice coil for improved transient response
• High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
• Fully featured user interface with LCD display for ease of navigation
• PC remote control software downloadable at turbosound.com
• Lightweight fibre glass reinforced composite enclosure
• Rugged powder coated perforated steel mesh grille
• Dual angle pole mount for accurate audience coverage
• Multiple internal rigging points for installation applications
• Mains input and link output on Neutrik powerCON* connectors

Specifications

• Frequency Response
  • 60 Hz – 18 kHz ±3 dB
  • 55 Hz – 20 kHz -10 dB
     
• Nominal Dispersion 90° H x 90° V @ -6 dB points
• Maximum SPL 128 dB peak
• Crossover type Active
• Transducers
  • 1 x 8" (208 mm) LF driver
  • 1 x 1" (25.4 mm) HF compression driver
     
• Limiter Independent HF, LF, peak and rms

• Maximum output power* 2,500 W
• Type Class-D
• Protection Short circuit, open circuit, thermal

• Input A / B 2 x combo jack/XLR
• Sensitivity Line +4 dBu, mic -22 dBu, switchable
• Input impedance 20 kO unbalanced, 40 kO balanced
• Maximum input level +21 dBu
• Output A / B 2 x XLR Linked to input
• Mix output XLR, balanced
• Output impedance 100 O unbalanced, 200 O balanced
• Ultranet input/link 2 x RJ45
• Mains Supply Neutrik powerCON input 20A and link 15A

• DSP Rotary push-encoder Buttons for Process, Setup, Exit, Enter
• Mixer section 2 x gain controls (channels A and B) 2 x Line/Mic switch

• Factory EQ presets Positioning, Sound mode, Sound modeling, FBQ
• Display LCD 128 x 32, blue backlit
• Delay 0 - 300 ms
• Equalisation High and low shelving EQ
• 2 x parametric EQ
• Limiter Zero attack input limiter
• Presets 20 total presets, 19 user-definable
• Crossover High Pass L-R 24 dB/oct
• Protection Lock-out function for all settings

• System
  • Signal 16 channels
  • Latency < 0.9 ms
     
• Cabling
  • Cables Shielded CAT5
  • Cable length max. 246 ft / 75 m recommended

• Power consumption 150 W @ 1/8 max power

• Dimensions (H x W x D) 457 x 279 x 279 mm (18.0 x 11.0 x 11.0")
• Net weight 14.7 kg (32 lbs)
• Construction Injection-moulded polypropylene enclosure
• Finish Black painted
• Grille Powder coated perforated steel
• Flying hardware M10 x 3 points