Yamaha Tio1608-D

Technical Specifications

• Sound Philosophy: Natural Sound Concept
• Grade: D-PRE
• Sampling Rate: 44.1/48kHz
• Indicators: +48V
• Gain Compensation: N/A
• HA Control Redundancy from CL/QL consoles: N/A (Primary only)
• Controllability from R Remote software: Supported
• Maximum number of units using HA remotes per system: Up to 3
• AD8HR mode (HA control from M7CL and LS9): N/A
• Analog Inputs: 16
• Analog Input Connector: Combo Jack
• Analog Outputs: 8
• AES/EBU Outputs: 0
• AC Inlet: Normal
• Heights: 2U

General Specifications

• Sampling frequency rate: External 44.1kHz or 48kHz
• Total harmonic distortion: Less than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHz
• Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHz
• Dynamic range: 108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA Converter
• Hum & noise level:
  • Equivalent input noise -128dBu, Gain=+66dB *Measured with A-weighting filter
  • Residual output noise -88dBu, ST master off *Measured with A-weighting filter
• Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHz
• Heat dissipation: 100-240V, 50/60Hz, 43.5kcal/h
• Power requirements: 100-240V, 50/60Hz
• Power consumption: 50W
• Dimensions
  • W 480mm (18-7/8")
  • H 88mm (3-4/8")
  • D 364mm (14-3/8")
• Net weight 5.7kg (12.6lbs)