IT Geluid Communicatie Kabels Licht Sets Rigging Special FX Video Conference Diversen Decor & Stage

Home / Video / Randapparatuur / Converters / Scanconverters / Extron VSC 700
In winkelwagen

Extron VSC 700

VSC 700 Scan Converters
 
Video input
   Number/signal type  1 RGBHV, RGBS, RGsB with 1 buffered loop-through
   Connectors  2 x 5 female BNC (5 for input, 5 for loop-through)
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  0 V to 2.0 Vp-p with no offset at unity gain
   Impedance  75 ohms
   Horizontal frequency  Autoscan 24 kHz to 100 kHz
   Vertical frequency  Autoscan 50 Hz to 120 Hz
   Resolution range  Autoscan 560 x 384 to 1920 x 1200; 480p, 720p, 1080i, 1080p (RGB only)
   DC offset (max. allowable)  2.0 V
   External sync (genlock)  0.3 V to 1.0 Vp-p
 
Video processing
   Encoder  10 bit digital
   Digital sampling  24 bit, 8 bits per color
   Colors  16.8 million
   Horizontal filtering  4 levels
   Flicker filtering  4 levels
   Encoder filtering  4 levels
 
Video output
   Number/signal type  1 RGBHV, RGBS, RGsB, or component video
1 SDI component video (VSC 700D only)
1 S-video
1 NTSC/PAL composite video
   Connectors  5 BNC female: RGBHV/RGBS/RGsB/component video
1 BNC female: SDI component video (VSC 700D only)
(1) 4-pin mini-DIN female: S-video
1 BNC female: composite video
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-Video
   Minimum/maximum levels  0.0 V to 0.7 Vp-p (RGB)
0.0 V to 1.0 Vp-p (component video, G of RGsB)
   Impedance  75 ohms
 
Sync
   Input type  Autodetect RGBHV, RGBS, RGsB
   Output type  RGBHV, RGBS, RGsB
   Genlock connectors  1 BNC female: genlock input
1 BNC female: genlock output (terminate w/75 ohms if unused)
   Standards  NTSC 3.58, PAL
   Input level  1.5 V to 5.0V p-p
   Output level  TTL: 5.0V p-p, unterminated
   Input impedance  600 ohms
   Output impedance  75 ohms
   Max. input voltage  5.0 Vp-p
   Polarity  Negative
 
Control/remote — scan converter
   Serial control port  RS-232 or RS-422, 9-pin female D connector
   Baud rate and protocol  9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configurations  RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+
   IR controller module  VSC Remote
   Program control  Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
 
General
   Power  100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal
Locatie GRONINGEN
Verhuurder Bano
Afstand
Aantal beschikbaar 1 stuk(s)
Prijs p/d € 50,00
  In winkelwagen

Rent Around

E: info@rentaround.nl


        

Informatie

Assortiment